Oil Contamination Monitor OCM- 15
An oil content meter (OCM) is an integral part of all oily water separator (OWS) systems. Oil content meters are also sometimes referred to as oil content monitors, bilge alarms, or bilge monitors.
The OCM-15 type bilge water alarm device has been designed specifically for use in continuous monitoring of
oil-in-bilge water, 15 ppm alarm and control of discharge, detection, memory and enquiry of alarm status. It is
applicable to detect boiler condensate water. And it applies to oil and chemical industries as well.
Features
Compact and robust construction
Low maintenance
Small dimensions
Easy installation
Continuous on-line work
Works adjustment
Easy zero adjustment via push buttons (+-5ppm)
IMO-Resolution MEPC.107 (49).
CCS approved
Type: | OCM-15 |
Range: | 0 – 30 mg/l can exceed to 50mg/l |
Accuracy | Better than 5mg/l |
Linearity | better than 2 % |
Display | LCD display |
Power Supply: | 220VAC/110VAC ± 10% |
Consumption: | 10 VA |
Alarm Points: | 1-15ppm |
Alarm Points works set: | 15ppm |
Alarm 1 delay | 0-10 second. |
Alarm 2 delay | 0-10 second |
Alarm output | Two way relays output |
Alarm relay output contact value | 5A, 250VAC |
Alarm relay output feedback signal test | Two way working status contact testing |
Alarm Indication: | Red LED's |
Output Signal: | 4 - 20 mA, reversible Ri < 500 Ω |
Sample Water Pressure: | 0.01 -6 bar |
Sample Flow: | approx. 0.2 - 4 l/min depend on pressure |
Ambient Temperature: | 0 to + 55° C |
Sample Water Temperature: | + 1 to + 80° C |
Size (over all): | 360 mm W x 240 mm H x 105 mm D |
Degree of Protection: | IP 45 |
Weight: | 8kg |
Pipe Connections: | R 1/4" Female |
Standard | IMO.Res.MEPC.107(49) |
