15000 psi BOP safety valve with control lines and panel for well testing
Well testing15000 psi BOP safety valve for the DST Opeation
General information of 15000 psi BOP safety valve
The 15000 psi BOP safety valve is a Fail Safe Safety Valve for testing from a land or jack-
up rig. The safety valve is normally run inside or below the Blow Out Preventer (BOP)
and is used to control well flow.
This kind of 15000 psi BOP safety valve has a port for chemical injection downhole or to
control a subsurface safety valve. The 15000 psi BOP safety valve is capable of cutting
wireline and coiled tubing using the nitrogen charge or by application of balance line
pressure.
Specification of 15000 psi BOP safety valve
No | Specification | 8" |
1 | O.D. | 203.2mm |
2 | Bore Diameter | 76.5mm |
3 | Length | 2855.5mm |
4 | Working pressure | 103.5Mpa |
5 | Internal pressure strength | 178.3Mpa |
6 | External pressure strength | 257.8Mpa |
7 | Tensile strength | 6299KN |
8 | Torque strength | 137.6KN.m |
9 | Service | H2S,NACE MR0175 |
10 | Working temperature | -29oC+204oC |
11 | Connection thread | 5 3/4-4AS.B 5"-4ACME.B |
The BOP safety valve cut the tubing
ZZ TOP's Facility
ZZ TOP OIL TOOLS manufactures the drill stem testing tools and surface testing equipment as per NACE MR 0175. All the DST tools are with traceability,and the DST tools can be worked in H2S & CO2 above 175 F and full H2S, also with the skilled and experienced engineers, we can design the drill stem testing tools as per well condition. Moreover, we supply the training in our factory and operation instruction at the well site. The DST tools are exported to USA, Colombia, India, Pakistan, Iran, Brazil etc. and enjoy the good reputation from the customers.
15000 psi BOP safety valve with control lines and panel for well testing
Well testing15000 psi BOP safety valve for the DST Opeation
