Model | YWT-820*14 | ||||
Size L*W*H m | 20-2.4 -2 | Weight | About 24T | Working scope | Can make OD. 325-820mm carbon steel elbow max wall thick 14mm . |
Tianjin Port | |||||
The Main Technical Parameters of The Machine 1 The oil cylinder:ID 360mm, the rod:260mm ,the effective trip: 6.5m, pressure:21Mpa,2 bars The maximum thrust of the 2 cylinders:420 tons; The working speed: 0-2000px/min , The max backward speed: 9500px/min. 2 The pump station:63scy-plunger pump :2 set, 18.5KW Motor: 2sets (the main working pump) 3 PV2R13-23-116 double vane pump 1 set,15kw motor 1 set. The hydraulic valve is integrated oil rout, hydraulic back fork gate. Automatic feeding. an adjustable shelf (height and width) for the heating coils 3. The frame for the machine body: 30# channel steel, welded with 43kg steel rail 4 The panel for the main engine: welded with 40-50mm medium steel sheet. 5 Distribution cabinets, operation box 1 set 6 Intermediate-frequency power (power 600KW 380v,220v,50/60Hz) The scope of supply A. frame for the main engine: 1set, hydraulic pump station: 1 set, main cylinders 2 pieces,front and back fork door:1 block each . B.distribution box 1set, Controlling ark 1 set. C. feeding shelf: 1 set D Shelf for the heating coils :1 set E. other small cylinders 2 pieces F Intermediate-frequency electric ark:1 piece, reactor, capacitor:1 set, G water cable 500m㎡: 2 (L=3000mm) K Induction heating coils: For OD 820-530mm , 1D and 1.5D (8 pieces in total) L The equipment foundation drawing, hydraulic principle drawing, electrical diagram, machine drawing, manual operating instruction Skype:shonepole Yanshancounty Fengliyuan Pipe Fittings Equipment Manufacture Co.,Ltd Fengliyuan Pipe Fittings Equipment Manufacture Co.,Ltd | |||||
The scope of supply A. frame for the main engine: 1set, hydraulic pump station: 1 set, main cylinders 2 pieces, front and back fork door:1 block each . B．distribution box 1set, Controlling ark 1 set. C. feeding shelf: 1 set D Shelf for the heating coils :1 set E. other small cylinders 2 pieces F Intermediate-frequency electric ark:1 piece, reactor, capacitor: 1 set, G water cable 500m㎡: 2 (L=3000mm) K Induction heating coils: For OD 820-530mm , 1D and 1.5D (8 pieces in total) L The equipment foundation drawing, hydraulic principle drawing, electrical diagram, machine drawing, manual operating instruction This series elbow machine is mainly used for cold push molding of carbon steel, stainless steel elbow is also used for seamless steel pipe elbow made of common equipment, can be customized according to user requirements. Medium. Small hydraulic push elbow forming machine. The whole machine structure of elbow machine: push machine by the host, heating coil support, hydraulic system, electrical system. The main machine adopts welding structure, the heating coil bracket adopts profile welding, and the hydraulic system adopts integrated control mode to realize smooth operation. The electrical system components choose excellent products. Elbow machine is the main equipment to produce elbow, can produce 21-1620mm, wall thickness 3-120mm, multiple more than 1D carbon steel, alloy steel elbow. The forming process of hot push elbow adopts main elbow machine, mandrel core head and heating device. Elbow machine production elbow with beautiful appearance, uniform wall thickness and continuous production. Mainly can be mass production, and mainly push carbon steel, alloy steel material. If you need to produce stainless steel elbow, choose the cold push elbow machine produced by our company. | |||||
