Busbar semi-automatic reversal assembly line / Busbar Production equipment for busway system
Specification:
Busbar structure | Four-piece | Remark |
Busbar height | H=113~650mm | |
Busbar length | 1.2~6m | |
Connection structure | Riveting without hole | |
Nos Of riveting machine | More than 1 set | |
Housing dimension | L15~20m*3m | |
Control mode | Manual riveting, automatic reversal | |
Nos of swing-table | 2~6 pieces | |
Nos of up-down clamping fixtures | 3~4 pieces | |
Voltage | 380/400V AC 50/60Hz | |
Power | 5kW | |
Air source | 0.6MPa |
Advantages:
1. The semi-automatic busbar production line can realize automatic clamping from left to right and down to up which is convenient for drilling and riveting.
2. The production line is flexibly compatible,suitable for busbar with width 74.5mm-350mm.
3. The electrical control system can clamp at the same time or separately.
4. The semi-automatic busbar assembly line is a cost-effictive production line and more stable which can decrease the NG rate and labour cost and increase the working efficiency.
5. The clamping is powered by air compressor 5-8MPA, which only comsumes the air when operation and is more environment-friendly comparing with the electrical comsumption of oil pressure.
