.jpg)
YKM have the ability to supply, research and develop various specification chain link fence ,galvanized and PVC coated chain link fence.
Chain link fence also referred to as wire netting ,chain wire fence ,hurricane fence ,and cyclone fence ,usually made from galvanized stee wire and PVC and Linear low-density polyethylene coated(exopy) steel wire .
Sizes and uses
Chain link fence shown protecting an animal enclosure.fencing usually comes in 20 rod and 50 ft rolls which can be joined by "unscrewing" one of the end wires and then "screwing" it back in so that it hooks both pieces. Common heights include 3 ft, 3 ft 6 in, 4 ft, 5 ft, 6 ft, 7 ft, 8 ft, 10 ft, and 12 ft, though almost any height is possible. Common mesh gauges are 9, 11, and 11.5. For tennis courts and ball parks the most popular height is 10 ft.
Chain link fence also referred to as wire netting ,chain wire fence ,hurricane fence ,and cyclone fence ,usually made from galvanized stee wire and PVC and Linear low-density polyethylene coated(exopy) steel wire .
Sizes and uses
Chain link fence shown protecting an animal enclosure.fencing usually comes in 20 rod and 50 ft rolls which can be joined by "unscrewing" one of the end wires and then "screwing" it back in so that it hooks both pieces. Common heights include 3 ft, 3 ft 6 in, 4 ft, 5 ft, 6 ft, 7 ft, 8 ft, 10 ft, and 12 ft, though almost any height is possible. Common mesh gauges are 9, 11, and 11.5. For tennis courts and ball parks the most popular height is 10 ft.
The popularity of chain-link fence is due to its relatively low cost and ease of installation. A further advantage is that due to the open weave, chain-link fences are transparent, and do not obscure sunlight from either side of the fence. If a semi-opaque fence is desired, this can be achieved by the insertion of slats into the mesh.
Installation
The installation of chain-link fence involves setting posts into the ground and attaching the fence to them. The posts may comprise steel tubing, timber or concrete and may be driven into the ground or set in concrete. End posts, or terminal posts, must either be set in concrete or anchored to prevent leaning under the tension of a stretched fence. After the end posts are set, line posts are driven in equally spaced at intervals of 2.5-3.0m. The fence is then attached at one end, stretched, and attached at the other; the excess being easily removed by "unscrewing" a wire. Finally it is tied to the line posts with aluminum wire.
The installation of chain-link fence involves setting posts into the ground and attaching the fence to them. The posts may comprise steel tubing, timber or concrete and may be driven into the ground or set in concrete. End posts, or terminal posts, must either be set in concrete or anchored to prevent leaning under the tension of a stretched fence. After the end posts are set, line posts are driven in equally spaced at intervals of 2.5-3.0m. The fence is then attached at one end, stretched, and attached at the other; the excess being easily removed by "unscrewing" a wire. Finally it is tied to the line posts with aluminum wire.
.jpg)
.jpg)
