I. Technical Parameters
| System | |
| Type: Single Phase | On/Off-Grid System @ Vertical Axis |
| Axis Type: | Maglev Axis |
| Rated wind speed | 8.9m/s |
| Wind energy ratio | 45% |
| Diameter of Wind Rotor Design Standard Design Service Life | 4m CE EN61400-2/EN60204-1 25 Years |
Performance Parameter | |
| Rated Electrical Power | 5KW@ 8.9m/s |
| Cut-in wind speed | 3m/s |
| Cut-out wind speed | 25m/s |
| Shut-down (high wind) | 26m/s |
| Security wind speed | 50m/s |
| Annual Power Output | 7200khw(Minimum Output) |
| 20300kwh(Maximum Output) | |
Blades Number of blades/Length | 5PCS/ 3.7m vertical Height |
| Material/ Weight | Epoxy/Glass Fibre |
| Generator | |
| Generator Type / Frequency | 3phase PMG/50Hz |
| Voltage Output | 3phase@50Hz, 0-500VAC |
| Rated Rotation Speed | 100RPM |
| Maximum power output | 5.98KW@12-15m/s |
| Insulation | Class F |
Off-Grid Charge Controller | |
| Input voltage from generator | 0-300VAC/50Hz |
| Charge voltage /Time | 240VDC/ about 16 hours |
| Battery configuration | 20PCS -12V-150/200AH |
Off-Grid Inverter | Pure Sine Wave Inverter (5KW) |
| Input voltage | 240VDC |
| Output voltage | 220V-240VAC /50Hz(Single Phase) |
| On-Grid Inverter | Sungrow-China WG5K (5KW) |
| SMA-Germany Windboy 6000A (6KW) | |
Tower | |
| Free Standing Tower | 8m / 2 Sections (Each Section 4M) |
| Tower Surface Treatment | Hot DIP galvanized |
| Other optional Height | 10m, 12m, 15m |
II. Parts Fabrication
III. Project Case Of FDV-5KW VAWT
IV. 12m Hydraulic Tower Testing Report
V. CE Certificate of Wind Turbine & Tower
