Hennopack Top foil Sheet Dispenser is placed before in the process area of a Rotary arm automatic wrapping system. The load enters the process area, a sheet is pulled from the supply roll and is placed on the top of the load. At this point, as the placer arms are raised, will transport the pallet to the rotary arm pallet wrap, then the work mode is activated until the entire load is wrapped.
Item Parameters
Pallet size L:1200mm,W:1200mm ,accept customized design
Wrapping Height 1800mm,accept customized design
Wrap speed max 40 pallets/hour
Top sheet pulling speed 3 – 12 meters/min
Conveyor Height 500±50mm
Top sheet lifter motor 0.37kw
Air Press 0.4~0.7 Mpa
Top sheet cut method motor driven knife
Control System PLC program logic control+Touch Screen
Working Mode Fully Auto unmanual
Power Supply 3PH 380VAC, 50/60Hz
Top Sheet type PE film, thickness 50-75microns, width1600-1800mm, net weight 120kgs max
Advantages
1.choose wear-resisting costs,long service life;
2.Membrane support dynamic pre-stretching mechanism,pre-stretching up 250%;
3.The rising and falling speed of the film fram can be adjusted respectively,and the film feeding speed can be adjusted;
4.chain control,smooth and reliable,slow start slow stop;
5.Wrapping number of top and bottom can be set separately;
6.Film system with the following mechanism,a pull can be.
7.Mechanial revolving arm.
8.Automatic electric eye delivery system
9.Automati film breaking device;
10.Pretension membrane frame;
11.Independent electronic control box.
Optional choice;
Roller conveyor
Protection gate
(if you need this one,you need to tell me your dimension).
