F24-60 joystick radio remote control tower crane remote controller
More information, please contact lily: whatsapp: 0086 15136229290
Standard Configuration:
One transmitter;
One Receiver;
One 1.5m cable connect with receiver
One operation and maintain manual.
Product Description:
1. Control Points: up to 40
2.2 Joytsitck + 6 function keys + 3 positions and 2 positions rotating switches
3. Voltage: AC/DC12V,AC/DC24V,AC36V,AC48V,AC110V,AC220V,AC380V,etc
4. IP65, used for outdoor and indoor
5.Light weight and neck hanging design for Asian ergonomics
6.With 3 steps battery voltage alarm device, the power is cut off during low power
7.Safety key switch
8.Enhanced watch-dog circuit with automatically stop device
9.Signal search and frequency automatic tracking circuit
10.Prevent power from sudden breaking
11.Programmable relays outputs
12.3 super heterodyne receiving circuits
13.LED and indicator outputs
14.Variety functions and parameters can be set by computer interface
15.Setting free up to users' requirements
Data Sheet:
Transmitter:
Model | F24-60-TX-V-(E) |
TX Size | About 21.5x10.7x240px |
TX Weight | About 1137g |
Housing Material | Glass fiber-reinforced nylon-6 |
Protection Degree | IP65 |
Temperature Rating | -35°C ~ +85°C |
TX power Supply | Four 1.5 volts Batteries(AA Size) |
Number of buttons | 5 single speed button,1 START button |
Button Marking | English + number |
Joystick | Two 5-steps Joysticks |
Switch | 4 selector switch |
I.D.Code | 4.3 billion |
Voltage Warning | TX Red LED will flash slowly when the volts under 4.8V |
Operating Frequency | 310.0325-331.165MHz |
Channel Spacing | 0.2675MHz |
Channel | 80CH |
RF Power | ≦12DBm |
Fault Detection | TX Red LED is flashing quickly: 1.Not in the correct way to start; |
Receiver :
RX Model | F24-60-RX-V-(E) |
RX Size | 36x24x192.5px |
RX Weight | about2478g |
Protection Degree | IP65 |
Housing Material | glass fiber-reinforced nylon-6 |
connection diagram | English |
Temperature Rating | -35°C ~ +85°℃ |
Receiver Power Supply | AC380V,AC36V,AC220V,AC110V,AC48V,AC24V,AC12V/DC12V, AC380V/AC220V(50-60Hz) |
Relays | Max 40 Relays control functions(set by programming tool),1 relay control EMS |
Output Relays | 5Amp Relays(AC250V/10A Relays ,10Amp fuse) |
I.D.Code | 4.3 billion |
Operating Frequency | 310.0325-331.165MHz |
Channel Spacing | 0.2675MHz |
Channel | 80CH |
Sensitivity | ≧-110DBm |
Interface | Cable output |
Wiring Connection
Application:
1. Pump: concrete pump, Sany pump, putzmeister pump, schwing, concrete mixer pump, etc
2. Crane: Tower crane, jib crane, bridge crane,etc
3. Excavator ,etc
4. Hydraulic Equipment, Construction Machinery, etc
5. Automobile manufacturing, automobile machinery.
6. Other Equipment and sites which can be worked by radio control
