.jpg)
Medical Air Cushion
Specification:50x45cm
Specification:50x45cm
[Main Structure of the Product]
The medical air cushion ("air cushion" for short) is made of rubber or rubber plus plastic materials.
[Performance]
1.The nozzle of the air cushion should be fixed tightly and without air leak.
2.The air cushion should not leak when the pressure is of 980N.
[Application of the Product]
This product is used for the patient lying in bed for a long time or the paralytic patient to support his body and avoid the bedsore.
[Applicability]
This product is suitable for the patient lying in bed for a long time or the paralytic patient to support his body and avoid the bedsore.
[Usage]
Bofore use the air cushion, check if the nozzle is tight, if the valve inside is good, then fill enough air. (If you feel it a little soft, it's all right.)
[Attention]
The air cushion can only used for the patient, and can't be used under the wate
[Storage]
Store the air cushion in the room of cooling, the relative humidity should not more than 80%, no corrosive gas, and well airy.
[Service Life]
Two years.
.jpg)
