DC quick EV charging station with CHAdeMo/CCS cable
3.1 Product introduction
The CSI 60K750-EJa integrated AC&DC fast charger manufactured by Shenzhen Jingfuyuan Tech. Co., Ltd. consists of intelligent high-efficiency power unit, control unit, MMI, charging interface, metering and billing unit, communication interface, etc. Its operator-friendly MMI is intuitive for users; its modular design simplifies equipment maintenance and expansion. Users can enable charging in five modes including Time mode, Energy mode, Amount mode, Power mode (commissioning mode) and automatic charging by swiping cards.
The CSI 60K750-EJa integrated AC&DC fast charger is equipped with three charging guns (One European DC charging gun, one Japanese DC charging gun and one European AC charging gun), thus capable of charging three vehicles with one charging pile, of which the 43KW AC charging gun and either the 60KW DC charging gun can be used simultaneously. Therefore, the charging pile can satisfy the requirements of the charging station's for charging electric vehicles with different interfaces, maximizing the utilization rate of the power supply system, making full use of the charging piles and shortening the investment recovery period.
3.2 Product features:
Safety:
l With sophisticated charging protection, overcharging of vehicles can be effectively prevented, which is highly safe for vehicles and people.
l The charging piles are designed with protection against lightning, current leakage, short circuit, over current, overheating and reverse connection of battery polarities.
l The charging piles are capable of protection against input over/under voltage, connection fault, emergency stop, etc.
Flexibility:
l Supporting multiple protocols including DC CHAdeMO, DC CCS Combo-2 and AC type 2, it is capable of AC and DC fast charging compatible vehicles
l With modular design and high system reliability, the system features multi-module parallel output mode, which is flexible to configure and easy to maintain
l There are multiple optional charging modes, such as Time mode, amount, energy and automatic charging. The information such as the power charged, charging time, current electricity price and consumption amount is displayed in real time.
Intelligence
l Equipped with built-in RFID reader, it can identify the user intelligently
l Designed with various communication interfaces such as GPRS and Ethernet, it can report various running status and historical records in real time to ensure that the operation monitoring system to monitor the charging piles and collect data in an integral and traceable way.
l
The system software supports remote and local upgrade functions
Adaptability:
l With high protection rating, it can operate smoothly in harsh environments
l Featuring wide voltage output, it is suitable for electric vehicles with various voltage levels
l It is applicable to multiple scenarios where fast charging is needed, such as fast bus charging station, commercial charging station, highway charging station and large parking lots.
3.3 Technical parameters
Model | CSI 60K750-EJa |
Rated input | |
Connection to the power supply | 3P+N+PE |
Voltage & frequency | 400VAC±10%;45~65Hz |
Efficiency | ≧94% |
Power factor | ≧0.99 |
DC output | |
Voltage range | 100-500V/200-750V |
Maximum current | 150A(CCS Combo2)/150A (CHAdeMO) |
Maximum power | 60kw |
AC output | |
Voltage | 230/400V |
Current | 16A -63A |
Power | 3.7kw- 43kw |
General specifications | |
Material of enclosure | Galvanized steel sheet
|
Charging mode | 4 DC charging modes, 3 AC charging modes |
Connection to vehicles | JEVS G104(CHAdeMO) , IEC61851-23 PLC(CCS Combo -2), IEC61851-1(AC) |
DC charging interface | JEVS G104(CHAdeMO) /IEC61851-23(CCS Combo 2) |
AC charging interface | IEC62196 Type 2 |
MMI: Display RFID Identification and Certification System Communication with the background | Default: 7'' TFT color touch screen Mifare (Classic, DesFire EV1) or other configurations in line with requirements 3G /LAN/Wi-Fi |
Background communication protocol | OCPP (or optional)
|
Installation environment | Indoor/outdoor
|
Altitude | 6000m (derated for altitude more than 3000m)
|
Protection rating | IP55
|
Ambient temperature | -20-60 ° C (derated for temperature higher than 50 ° C) |
Storage temperature | -40-70℃ |
Relative humidity | 95%, without condensation |
Noise | <55 dB |
Plug length | 5m(Optional length) |
Dimensions (W*D*H) | 650*500*1350mm |
Weight | 230kg |
3.4 Environmental conditions
Allowable ambient temperature range | -20℃~＋60℃(derated for temperature higher than 50 ° C) |
Cooling method | Air cooled |
Allowable relative humidity | 5%～95% (without condensation) |
Allowable maximum altitude | 6,000 meters (derated for altitude higher than 3,000 meters) |
3.5 Structure of integrated AC&DC fast charger
Front door of CSI series
Model | W (Width) | D (Depth) | H (Height) | Wight (KG) |
CSI 60K500-EJa | 650 | 500 | 1370 | 230 |
3.5.1 Parts
l LED indicator
Name | Color | Description |
POWER | Green | Green indicator: Power indicator. When the charger is powered on, the green indicator stays on. |
DC1 | Yellow | When charging with the European charging gun, the yellow indicator is on; when the plug A stops charging, the yellow indicator turns off. |
AC2 | Yellow | When charging with the AC charging gun, the yellow indicator is on; when the plug B stops charging, the yellow indicator turns off. |
DC3 | Yellow | When charging with the Japanese charging gun, the yellow indicator is on; when the plug C stops charging, the yellow indicator turns off. |
FAULT | Red | In case the charger is faulty, the red indicator is on; after the fault is solved, the red indicator turns off. |
l LCD touch screen
The user can view the operation information of the charger on the touch screen, as well as performing specific operations as follows:
1. Controlling operation of the charger
2. Displaying the running data in real time
3. Displaying fault information
4. Setting parameters
5. Viewing the operation history
Refer to the LCD operating guide for the use of LCD touch screen.
