Hook bolt sleeve anchor is mainly composed of a hook bolt and sleeve produced by cold punching, being suitable for light or medium duty loading in concrete mechanical expansion anchor bolt systems. For installing, When the hex nut is tightened by tool, making cone nut move upwards to expand the sleeve at the lower end.
It is widely used in the application of anchoring-fixing the fixtures, hanging the objects in the concrete, masonry,solid brick or concrete block foundation materials.
{Product Parts Pre-assembled}:
→ Cold bent hook bolt + Din 125/9021 Washer + Din 934 Hex nut + Sleeve + Cone Nut
{Product Features}:
● Light or Medium duty loading.
● Hook bolt is producedby cold stamping process with less load strength than hot forged hook bolt.
● Stamp three oval holes in the sleeve body.
● Don't need precise drilling depth
● Quick and efficient for fixing or hanging workings.
● Fully pre-assembled and ready to use.
● Safe and easy to expand in soft substrates.
● Expansion performance is achieved when cone nut expands sleeve body.
{The Substrate}: ☑ Concrete ☑ Masonry ☑ Brickwork ☑ Solid brick wall ☑ Stone
{Product applications}:
■ Curtain wall brackets, Piping brackets, Handrails, Gates,Ranking angles or corner guards.
■ Precast panel, Decorative and Architectural panel.
■ Timber skirting, Wooden frame, Roofing and floor frame work.
■ Electrical junction boxes, Duct work, cable trays and suspended ceillings.
{Installation Procedures}:
1. Drill a hole in the base materials at right angle, diameter and depth.
2. Clean the hole using a brush or air pump before installing.
3. Reorganize anchor body to the natural state and hammer the head to insert it into the drilled hole until the flat washer tightly touch with the substrate surface.
4. Turn the hook clockwise by proper tool and make body expand and fix fully for use purpose.
+Or drive anchor body to pass through a guide hole in the fixture and insert into the drilled hole until the flat washer tightly touch with the fixture surface.
5. Fasten hex nut by tool until be fixed fully.
{Product size description}: Unit: mm
| Item Code | Anchor Size | Sleeve Size | Hook Bolt | Drill Dia. |
| 645H-CSLA | M6 X φ8 X 45 | φ8 X 30 | M6 X 45 | 8 |
| 660H-CSLA | M6 X φ8 X 60 | φ8 X 45 | M6 X 60 | 8 |
| 850H-CSLA | M8 X φ10 X 50 | φ10 X 30 | M8 X 50 | 10 |
| 860H-CSLA | M8 X φ10 X 60 | φ10 X 40 | M8 X 60 | 10 |
| Others | ~~ | ~~ | ~~ | ~~ |
| 880H-CSLA | M8 X φ10 X 80 | φ10 X 60 | M8 X 80 | 10 |
| 1060H-CSLA | M10 X φ12 X 60 | φ12 X 35 | M10 X 60 | 12 |
| 1070H-CSLA | M10 X φ12 X 70 | φ12 X 45 | M10 X 70 | 12 |
| Others | ~~ | ~~ | ~~ | ~~ |
| 10100H-CSLA | M10 X φ12 X 100 | φ12 X 75 | M10 X 100 | 12 |
| 1270H-CSLA | M12 X φ16 X 70 | φ16 X 42 | M12 X 70 | 16 |
| 1280H-CSLA | M12 X φ16 X 80 | φ16 X 52 | M12 X 80 | 16 |
| Others | ~~ | ~~ | ~~ | ~~ |
| 12130H-CSLA | M12 X φ16 X 130 | φ16 X 102 | M12 X 130 | 16 |
| 16100H-CSLA | M16 X φ20 X 100 | φ20 X 70 | M16 X 100 | 20 |
| 16110H-CSLA | M16 X φ20 X 110 | φ20 X 80 | M16 X 110 | 20 |
~~The other usual sizes and special sizes are available accordding to customer's requiry.
.jpg)
