KMT and KMTA Precision Lock Nuts are used to locate bearings in machines and equipment that require high precision such as lathes, grinders, milling machines, motors, shut-off valves, spindle and ball screws.
These nuts have 3 brass pins angularly distributed around its circumference which are tightened against the shaft by screws. The pins are machined to match the shaft thread and its tilt is equal to nut thread angle so the nuts are not subject to axial loads or deformation, allowing locking in the exact position. Although they use the same locking system, the KMT and KMTA nuts differ by the external profile and tightening tools required.
Our Precision Lock Nuts are made of Carbon Steel as standard with optional choice of Stainless Steel.
Assembling
The KMT nuts are usually mounted with hook spanners, however, sizes up KMT 15 can be mounted using wrenches. The KMTA are mounted using pin wrenches or a pin-type face spanner and both of them are equipped with through-body screws. Once assembled, the bolts should be tighten lightly until each brass pin touches the shaft thread and only then tighten the screws alternately with a torque wrench until the recommended torque value is achieved for all the three bolts.
Removal
When removing the precision nuts KMT and KMTA, first loosen the three screws. Note that the brass pins can still be attached to the shaft thread, in order to proceed, tap the nuts near the pins using a copper or rubber hammer to loosen them. Only then remove the nut.
Technical Details
Product Name: Precision Lock Nuts
Series: KMTA
Material: 42CrMo
Hardness: HRC 28-32
Thread Tolerance: Metric Thread ISO 4H
Lateral Deflection: 0.002mm
Drawing and Technical Data Sheet of KMTA series Precision Lock Nuts
| KMTA Series Precision Lock Nuts | ||||||||
| Precision Lock Nuts No. | G | Dm | D | B | N1 | N2 | P | Nm |
| mm | mm | mm | mm | mm | mm | |||
| KMTA 5 | M 25x1.5 | 42 | 35 | 20 | 4.3 | 4 | M 6 | 8 |
| KMTA 6 | M 30x1.5 | 48 | 40 | 20 | 4.3 | 5 | M 6 | 8 |
| KMTA 7 | M 35x1.5 | 53 | 47 | 20 | 4.3 | 5 | M 6 | 8 |
| KMTA 8 | M 40x1.5 | 58 | 52 | 22 | 4.3 | 5 | M 6 | 8 |
| KMTA 9 | M 45x1.5 | 68 | 58 | 22 | 4.3 | 6 | M 6 | 8 |
| KMTA 10 | M 50x1.5 | 70 | 63 | 24 | 4.3 | 6 | M 6 | 8 |
| KMTA 11 | M 55x1.5 | 75 | 70 | 24 | 4.3 | 6 | M 6 | 8 |
| KMTA 12 | M 60x1.5 | 84 | 75 | 24 | 5.3 | 6 | M 6 | 8 |
| KMTA 13 | M 65x1.5 | 88 | 80 | 25 | 5.3 | 6 | M 6 | 8 |
| KMTA 14 | M 70x1.5 | 95 | 86 | 26 | 5.3 | 8 | M 8 | 18 |
| KMTA 15 | M 75x1.5 | 100 | 91 | 26 | 6.4 | 8 | M 8 | 18 |
| KMTA 16 | M 80x2 | 110 | 97 | 30 | 6.4 | 8 | M 8 | 18 |
| KMTA 17 | M 85x2 | 115 | 102 | 32 | 6.4 | 8 | M 10 | 35 |
| KMTA 18 | M 90x2 | 120 | 110 | 32 | 6.4 | 8 | M 10 | 35 |
| KMTA 19 | M 95x2 | 125 | 114 | 32 | 6.4 | 8 | M 10 | 35 |
| KMTA 20 | M 100x2 | 130 | 120 | 32 | 6.4 | 8 | M 10 | 35 |
| KMTA 22 | M 110x2 | 140 | 132 | 32 | 6.4 | 8 | M 10 | 35 |
| KMTA 24 | M 120x2 | 155 | 142 | 32 | 6.4 | 8 | M 10 | 35 |
| KMTA 26 | M 130x3 | 165 | 156 | 32 | 6.4 | 8 | M 10 | 35 |
| KMTA 28 | M 140x3 | 180 | 166 | 32 | 6.4 | 10 | M 10 | 35 |
| KMTA 30 | M 150x3 | 190 | 180 | 32 | 6.4 | 10 | M 10 | 35 |
| KMTA 32 | M 160x3 | 205 | 190 | 32 | 8.4 | 10 | M 10 | 35 |
| KMTA 34 | M 170x3 | 215 | 205 | 32 | 8.4 | 10 | M 10 | 35 |
| KMTA 36 | M 180x3 | 230 | 215 | 32 | 8.4 | 10 | M 10 | 35 |
| KMTA 38 | M 190x3 | 240 | 225 | 32 | 8.4 | 10 | M 10 | 35 |
| KMTA 40 | M 200x3 | 245 | 237 | 32 | 8.4 | 10 | M 10 | 35 |
Notes:
Non-Standard Precision Locknuts are available upon request.
The above data is for reference only, we may change the specs without prior notice.
1Nm = 10.2kgf.cm = 0.73lb.ft
Incoporated in 1999, HOLK Bearing leads the way in the design and manufacture of quality Bearing Housings, Split Plummer Blocks, Bearing Adapter Sleeves, Withdrawal Sleeves, Precision Lock Nuts, Locking Assemblies, Hydraulic Nuts, Bearings and accessories. We pride ourselves on an immediate and dedicated response to standard and special bearing housing solutions.
HOLK's maximum bearing housing fabrication capability: up to 5 tons/pc
We produce top-notch quality Split Plummer Blocks worth more than US$1,000,000 to a big famous European bearing company every year.
We manufacture premium quality Bearing Adapter Sleeves worth more than US$500,000 to a big famous European bearing company every year.
