1. General
ET8610 GPRS/SMS FAM (Fixed Asset Monitoring) is an enhanced GPRS/SMS messenger (GPRS or CDMA service optional) which integrated with I/O port, RTU (Remote Terminal Unit), Relay, Sensor functions, it can help people to monitoring, control, SMS alarm the remote devices.
ET8610 GPRS/SMS FAM main apllication filed is Power grid automatization, industrial monitoring, traffic management, weather, finance, Basic Environmen protecting, colliery, Oil field etc, especially, apply in security, remote control. Implement transparent data transmission over GPRS/SMS network.
2. Feature
· Industrial Design
ET8610 GPRS/SMS FAM is industrial design which built-in watchdog chipset to ensure the system work continuously, Watchdog monitoring the GPRS module and CPU all the time, if the GPRS module or CPU does not response for long time, FAM will restart automatically. FAM is very suitable for long-term continuous work applications.
· Transparent data transmission
ET8610 GPR/SMS FAM provides full transparent data transmission channel through RS232 interface it use for connect different types of PLC, RTU which extend the scope of FAM application, and better services for users.
· Main and backup data center
ET8610 GPR/SMS FAM support main and backup data center, user can set both main data center ip address or domain name, when FAM fail to connect with main data center, it will try to connect backup data center automatically.
· Embedded Li-battery and Temperature sensor
ET8610 GPRS/SMS FAM built-in 1000mA Lithium battery, it can work for 6 hours if the external power supply cut off. Also, FAM will send alarm message to notify the user that the external power supply was cut off. the built-in temperature sensor can real-time monitoring of environment temperature, FAM also support t external digital temperature sensor that monitor user's device surface temperature, when the temperature lower or higher than the specified value, FAM will send alarm message, when the temperature returned to normal, FAM will send notice message to user also.
· User-define alarm SMS
ET8610 FAM GPRS/SMS support User-define alarm SMS, according to alarm port status, FAM will choose the user pre-define content, and send to user mobile phone by SMS, it's easy for user to understand alarm message.
· I/O status Buffer
ET8610 FAM has buffer to save the I/O status data during GPRS/SMS tunnel problem, when the GPRS/SMS tunnel return to normal, FAM will send buffer all data immediately.
· Ring and SMS alarm
FAM support ring and SMS for sending alarm message, when the alarm occurred, FAM will start ring for 10 seconds, and then send alarm SMS to users. Users also can remote setting and control FAM by SMS.
· SMS receipt
To ensure user receive the alarm messages, user can set the alarm SMS resend frequency, unless the alarm clear or receive ACK message receipt from user phone, FAM will repeat to send alarm SMS by Specified frequency and interval.
· Alarm clear message
All of FAM I/O port can be set the alarm clear message, when the port alarm status clear, FAM will send alarm clear SMS to notice user.
· Regularly report the I/O status
ET8610 FAM support auto send I/O port status by specified time, after user set the time, FAM will send the port status on specified time daily.
· Clock synchronization
FAM support clock synchronization; it can read the clock from SMS or get clock from management platform by GPRS.
· Cell phone and PC be Data service center
GPRS/SMS FAM supports cell phone and PC server to be data service center, if PC to be service center, please use eTel FAM management platform software, it supports SQL data base, Google map etc. it can monitor thousands FAM via GPRS; if the stations exceeds 500 points, we suggest use FAM management platform.
· Graphical configuration software
ET8610 GPR/SMS FAM provide full graphical software configuration, easy to use, and supports import or export configuration file; so users just simply click a few icons to quickly setup FAM system.
· Worldwide applications
ET8610 GPRS/SMS FAM has broad range of applications; it can be used in industrial remote monitoring, security, meteorology, environmental protection, water conservancy, electric power industries.
To more suitable of industrial M2M applications, eTel can quickly modify the software and hardware according to customer requirements.
3. Specifications
Basic
GPRS Dual Bands 900Mhz/ 1800Mhz
GPRS Quad Bands 850/900/1800/1900Mhz (Optional)
CDMA 800mhz (Optional)
Dual SIM Slot (Optional)
Self-define re-connecting interval
Clock synchronizing
Support external temperature sensor
Embedded Temperature Sensor
Support Temperature verify
I/O status buffer
Self-define report I/O status daily
Self-define online report interval
AI and the TE port upper and lower limits
Optical isolation terminal
Smart power management
Automatic power supply detection
Li-Battery inside
PC based configuration tool
Real time OS, steady system
Watch dog design, ensure FAM alive
Low consumption, industrial design
Fully type approved with ETSI GSM Phase 2+ standard
Enhanced EMC/EMI design
GPRS
Industrial class GPRS wireless module
Embedded PPP, TCP/IP Stack
Support main and backup service center
Support TCP/IP and UDP/IP
Transparent data transmission
Support RS232 interface for data transmission
Supports DNS and dynamic data service center IP address
Support continually or sleep work mode
Support Carrier public & special APN
Work with FAM management platform
Remote monitoring and control
SMS
Support SMS and Ring Alarm
Set defense by SMS
Self-define SMS alarm message
Alarm/DisAlarm by SMS
Automatic send alarm SMS to mobile phone when alarm is triggered
Support 4 service center number, and customized setting for center
SMS query FAM signal strength
DO Relay triggered by alarm or SMS
Automatic SMS alarm when data above or below the preset levels
Support SMS remote configuration
Alarm clear message
Alarm SMS receipt and acknowledgement
Note: DI = Digital Input
AI = Analog Input
DO = Digital Output
TE = Temperature
Interface
Antenna: 50Ω/SMA Female
SIM/R-UIM: 3V
Configuration: RS232
DI: 3 Ports (0-3V False, 3-36V True)
AI: 1 Port
DO: 1 Port
TE: 2 ports
Power
Voltage: 12V~18VDC (12~30V Optional)
Default Voltage: DC12V
Consumption:
Communication: 120mA@+12VDC
Idle: 30mA@+12VDC
Others
Dimension: 90mmx62mmx22.5mm
Weight: 190g
Operation temperature: -20~+55ºC
Storage temperature: -40~+85ºC
Relative humidity: 95% (no-condensing)
5.Part of compatible sensor
Float Water Level Sensor
Pressure Sensor
Speed Sensor
Infrared Detector
Tempture Sensor
Humidity Sensor
Water immersion Sensor
Dynamo Sensor
Magnetism Detector
Flow Sensor
Shock Sensor
Relay
Microwave Motion Sensor
Voltage Sensor
Wind Sensor
Smoke Sensor
Lighting Sensor
Gas/LPG Detector
Horizontal Sensor
Emergency Button
Sound & Flash Siren
6.ET8610 FAM Schematic block diagram
7.Applications
ET8610 GPRS/SMS FAM family products can be used for many industrial applications, such as:
Telecom stations monitoring (UPS battery, temperature, smoke)
Power transformer substation monitoring (door, smoke, temperature)
Remote control (air-condition, Power Supply, UPS, Relay)
Intelligent home security
Commercial alarm security
Rural area security
Data collection in remote location, harsh condition or rural area
Remote industrial equipment monitoring
Power grid automatization
Power failure SMS alarm
control remote device by SMS
Temperature and humidity alarm
Freezer warehouse monitoring
Walk-in cold room monitoring
Medical Storage temperature monitoring
Vending Machine SMS alarm
Production line Alarm Monitoring
Water pump SMS Remote Control
Environmental Monitoring
Water immersion SMS alarm
Power leakage protector alarm and remote control
GPRS Security
UPS Remote Monitoring
Air-Condition Remote Control
Fire prevention alarm system
Water Level SMS Alarm
Water Pipeline monitoring
.jpg)
.jpg)
