Summary:
Single unit output:powers 75W
Input voltage AC90-264V
100% full load burn-in test
Fixed switching frequency at 47-63Hz
Protections: Short circuit/Overload/Over voltage
Installed on DIN rail TS35/7.5 or15
Approvals: CE
Size: 55.5*125.2*100mm
Input voltage AC90-264V
100% full load burn-in test
Fixed switching frequency at 47-63Hz
Protections: Short circuit/Overload/Over voltage
Installed on DIN rail TS35/7.5 or15
Approvals: CE
Size: 55.5*125.2*100mm
Model Specification | DR-75W-12 | DR-75W-15 | DR-75W-24 | DR-75W-48 |
DC output | 12V 6.3A | 15V 5A | 24V 3.2A | 48V 1.6A |
Wave and noise | 50MVP-P | 50MVP-P | 50MVP-P | 50MVP-P |
Inlet stability | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
Load stability | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
Efficiency | 76% | 80% | 80% | 80% |
Adjustable range for DC voltage | ±10% | ±10% | ±10% | ±10% |
AC input voltage range | 85~264VAC 47~63Hz 120-370VDC | |||
AC input voltage range | Cold-start current 30A/230V | |||
OverLoad protection | 105%~135%hicup mode:auto-recovery | |||
OverLoad protection | 115%~135% rated output voltage | |||
Setup,rise,hold up time | 300ms, 50ms, 80ms | |||
Withstand voltage | I/P-O/P, I/P-FG:1.5Kv O/P-FG:05Kv 1minute | |||
Isolation resistance | I/P-O/P, I/P-FG, O/P-FG:500VDC/100MΩ | |||
Working temperature | -10℃~+50℃ | |||
Safety standards | Design refer to GB4943,UL60950,EN60950 | |||
EMC standards | Design refer to GB9254,EN55022 classB | |||
Weight | 0.6kg |