Adjustable temperature
High switching capacity
Small hysteresis
Terminals easily accessible
Clip fixing
Change-over contact
The mechanical thermostat is used for controlling heating and cooling equipment, filter fans or signal devices. The thermostat registers the surrounding air and can switch both inductive and resistive loads via snap-action contact.
Technical Data
Switch temperature difference | 4K (± 1.5K tolerance)* |
Sensor element | thermostatic bimetal |
Contact type | change-over snap-action contact |
Contact resistance | < 10mOhm |
Service life | > 100 000 cycles |
Max. switching capacity, NC | 250VAC, 10 (4) A |
DC 30W | |
Max. switching capacity, NO | 250VAC, 5 (2) A |
DC 30W | |
Connection | 4-pole terminal, clamping torque 0.5Nm max.: rigidwire 2.5mm², stranded wire (with wire end ferrule) 1.5mm² |
Mounting | clip for 35mm DIN rail, EN60715 |
Casing | plastic according to UL94 V-0, light grey |
Dimensions | 67 x 50 x 38mm |
Weight | approx. 0.10kg |
Fitting position | variable |
Operating/Storage temperature | -20 to +80°C (-4 to +176°F) / -45 to +80°C (-49 to+176°F) |
Protection type | IP20 |
Approvals | - |
*Connecting terminal "N" (RF heating resistor) causes the thermal feedback to work and so reduces the switch temperature difference to approx. 0.5K.
Art. No. | Operating voltage* | Setting range |
01170.0-00 | 230VAC | +5 to +60°C |
01170.0-02 | 230VAC | -20 to +30°C |
* operating voltage 120VAC wit setting °F upon request
Technical Drawing
.gif)
.gif)
