Temperature Humidity Chamber
SPEC:
Model TH-80
(A-F) TH-150
(A-F) TH-225
(A-F) TH-408
(A-F) TH-800
(A-F) TH-1000
Internal size W*H*D(cm) 40*50*40 50*60*50 60*75*50 60*85*80
100*100*80 100*100*100
Outside measurement W*H*D(cm) 120*165*115 130*170*125 140*185*
130 165*195*155 185*200*175 190*210*185
Temperature range
Low temperature:(A: +25degree; B: 0degree; C: -20degree; D:-
40degree; E: -60degree; F: -70degree)/high temperature:100degree
(150degree)
Humidity scope 20%-98% R.H.(10%-98%R.H); (5%-98%R.H Specially
selects the condition)
Warm humidity analysis precision/ Distributed precision 0.1degree;
0.1%R.H./Positive and negative 2.0degree; Positive and negative3.0%R.H.
Warm humidity control precision Positive and negative0.5degree; Positive and negative2.5%R.H.
Elevation of temperature/temperature decrease time Elevation of
temperature approximately 4.0 degree/minutes; Temperaturedecrease
approximately 1.0degree/minutes
In exterior material quality Inside and outside a box of material
quality is the SUS304#stainless steel plate system
Heat preservation material quality Thermostable high density chloro-
formic acetic anhydridefroth insulator material
Cooling system single stage compressor (-20 degree); Double
sectioncompressor (-40 degree to -70 degree)
Safekeeping of security installment The non- melt silk switch, the
compressor over-load protection,the cold intermediary high and low
pressure protection, the ultrahumidity ultra temperature protection,
the fuse, the breakdown warningsystem,lacks the water to report to
the police the protection
Fitting In the operation hole sets at the glass door (to select
andpurchase), the recorder (selects and purchases), observes the
Windows,50mm measures , In the PL box the lamp, the partition board,
does thegauze, the foot wheel, horizontal foot rest
Power AC220V , 50/60Hz , AC380V , 50/60Hz
Weight (approximately) 150KG 180KG 2
Certificate of these machines:
China official 3rd party calibration report
CE certiification
For the package:
1. PP film first
2. Vacuum package
3. PP film again
4. 10mm thickness PU foam to avoid collision
5. stronged plywood case
6. Standard ASLI CASE MARK
Our Main Products:
1) temperature humidity chamber
2) temperature fast change chamber (ESS chamber)
3) thermal shock chamber
4) temperture humidity combined salt spray chamber
5) temperture humidity combined vibration chamber
6) pressure accelerated aging chamber (PCT&HAST chamber)
7) high temperature aging chamber
8) sand and dust tester
9) rain/water spray chamber
10) salt spray chamber
11) UV climate resistant chamber
12) high temperature chamber/muffle furnace
13) vacuum oven
14) high frequency vibration tester
15) mechanical shock and impact tester
16) acceleration mechanical shock tester
