Reliable 19" international structure, Double wall type
Front single solid metal door with handle lock
Enhance door hinges with 130 degrees operation angle
Side solid metal door with lock
Rear single solid metal panel
Top with 2/8 fans for airflow&cooling, fan size: 120*120*38 mm
Several lockable wiring holes on top/bottom, size of the large hole at the bottom adjustable
Varies specification upon customers' special requirements
with 1 pc of lighting system,smoke alarm,temperature sensor
Width: 600,800 mm
Depth: 600,800mm
Height: 12U, 17U, 22U, 27U, 32U, 37U, 42U, 47U
Customized size is available
Flexible packing methods allows for convenient stocking and end user delivery.
Standard and Material:
Comply with
ANSI/EIA,RS-310-D;IEC297-2;DIN41491:PART1;DIN41494:PART7;GB/T3047.2-92 standard and ETSI standard.
Surface Finish:Degrease, acid pickling, rust prevention and parkerizing,pure water cleaning, static electricity powder coating
Material:SPCC cold rolled steel or Zink-plated panel or stainless steel
Thickness:Mounting profile:2.0mm,others: 1.50mm
IP degree: IP-55
Color:Body color:RAL5012(Top cover and base);RAL7035(The others)
NO. | Item | 600 wide | 800wide | Materials | Treatment | Note |
1 | Frame | 2 | 2 | 1.5mm SPCC steel | Powder coating | |
2 | Front Door | 1 | 1 | solid metal | \ | double wall type |
3 | Side Door | 1 | 1 | \ | \ | |
4 | Back Door | 1 | 1 | solid metal | \ | double wall type |
5 | Lock | 4 | 4 | \ | \ | Handle Lock |
6 | Top cover | 1 | 1 | 1.5mm SPCC steel | Powder coating | |
7 | Rear door panel | 1 | 1 | 1.5mm SPCC steel | Powder coating | |
8 | Fan unit | 1 | 1 | 1.2mm SPCC steel | Powder coating | |
9 | Ac fan | 2-8 | 2-8 | \ | \ | D>800,6-8pcs |
10 | Bottom panel | 1 | 1 | SPCC T=2.0 | Powder coating | |
11 | Earthing bolts | 1 | 1 | SPCC T=1.5 | \ | 25 cm |
12 | Castors tray | \ | \ | SPCC T=2.5 | Powder coating | |
13 | Castors | \ | \ | \ | \ | |
14 | Ajustable feet | \ | \ | \ | \ | |
15 | Mounting angle | 2 | 2 | SPCC T=1.5 | Powder coating | |
16 | 19inch rails | 4 | 4 | SPCC T=2.0 | Powder coating | |
17 | Cable management | \ | 2 | SPCC T=1.5 | Powder coating | Only for 800 W |
.
Reference picture:
| Item Number | Wide(MM) | Deep(MM) | High(MM) |
| WB-OD-A 8614 | 800 | 600 | 1375 |
| WB-OD-A 8814 | 800 | 800 | 1375 |
| WB-OD-A 8616 | 800 | 600 | 1575 |
| WB-OD-A 8816 | 800 | 800 | 1575 |
OPERATION CONDITIONS
• Must be protected against:
– Mechanical damage
– Improper handling
– A different usage than the cabinet is intended for
• Improper handling is especially:
– Overloading (maximum recommended load exceeding)
– Device installation that can influence negatively operation and function of the cabinet or the installed equipment
– Change of the construction or design of the cabinet
INSTALLATION OF THE CABINET
• To ensure the maximum recommended load, it is necessary to distribute the load equally.
• Place the cabinet on a flat floor and adjust any differences using the levelling feet.
• To avoid dust penetration in the case where cables lead through some of the cable openings, it may be sealed with a blanking panel with a brush or secured by a plastic frame (both can be purchased from us).
ENVIRONMENTAL PROTECTION
• All parts are made of recyclable materials and after decommissioning the cabinet, it must be disposed of according to relevant regulations.
CERTIFICATE AND CONFORMITY
• This product is fully in accordance with CE & RoHS.
