Dual Electric Grease Central Lubrication Pump For Industrial Lubricating
The model of Dual Electric Grease Central Lubrication Pump is electric grease pump, valve, piping accessories and other components, which is installed on the same base with two electric grease pump, a commonly used, a spare, double pump can be automatically switched by operating the pump valve connected to the loop, does not affect the normal operation of the grease pump operation by the electronic control system to manipulate, two pumps can work simultaneously.
How to use Dual Electric Grease Central Lubrication Pump:
The Dual Electric Grease Central Lubrication Pump should be installed in the interior, less dust, vibration and dry place, with a bolt fixed to the foundation with operating space left around it its' location should be easy to install grease supply, commissioning, inspection, maintenance and so easy to remove and the occasion.
Required is before using the reducer piston into the oil chamber (Recommended industrial gear oil N220), the red line to the location of the oil level gauge. Most of the new lubrication pump oil should be replaced after 200 hours, after every 2,000 hours of new oil changed regularly, it should always check the oil, and if the oil quality deterioration, it should shorten the replacement cycle. Filling the grease inside the oil storage must be used pumps from the grease supply port to join.
Dual Electric Grease Central Lubrication Pump
Grease used should be clean, does not allow impurities, dirt, dust, air bubble exists. Dual Electric Grease Central Lubrication Pump with the arrow indicating the direction of rotation direction while connection the motor wiring should be aware of this. The standard set pressure relief valve as 42MPa.
Dual Electric Grease Central Lubrication Pump technical data and installation dimensions as follow;
