Price: 10000.0 USD
Trade Term: FOB,CIF
Payment Terms: T/T,L/C
Trade on HiSupplier, Worry Free Guarantee
Trading safety, secure your money, lower the risk, protect both buyers and suppliers
HiSupplier is a Chinese multinational company in U.S, it helps to coordination and order landing.
More ›
  • Product Details
  • Company Profile
  • Product Reviews
Basic Info.
  • Control: PLC system 
  • Dimension: 1300mm x 900mm x1570mm 
  • used for: commutator surface 
  • Turning times: 4 times total 
  • Air source pressure: 0.5MPa~0.7Mpa 
  • powder: 4kW 
  • weight: 1100KG 
  • Voltage: AC380V+/-5% 
  • Model No.: ND-LHL-QSFA2 
  • Place of Origin: Zhejiang  
  • Min.Order: 1 Set/Sets
  • Means of Transport: Ocean, Air
Supply Capacity
  • Production Capacity: 30 sets
  • Packing:Wooden case which is suitable for sea transport
  • Delivery Date: 35 days

This type motor armature turning machine is used turning the commutator surface. The cutter moving in lateral or radial direction is controlled by ball screws which are driven by treble-spindle servo motor. After rough turning, the machine will turn accurately. Turning times(4 times total) and cutter feeding value(≥1um) could be set up on touch screen according to user`s needs. Treble-spindle servo motor control could make stable and precise cutter feeding.


Main Component

This type motor commutator turning machine is consist of V-supporting device, feeding device, arm driving device and box framework. Electric servo system controls the feeding device. While servo and pneumatic system take control of arm driving device. PLC controls the whole system and displays the process on the screen..


Technical Parameter

1. Process precisionInter-segment roundness < 1.5um, surface roughness < 0.4um
2. Speed adjustment rangeThe speed adjustment range is from 0Hz to 100Hz. Meanwhile, user can set any belt speed on touch screen.
3. Feeding valueIt could be set up randomly among 1um-0.1um. Normally, 1st feeding value is bigger than 2nd one, 2nd one is bigger than 3rd one and last one could be set up by factory on its experience.
4. Turning timesThe maximum turning time of the X spindle direction is 4 times, while so is the Z spindle direction. User could set the turning times for each rotor according to their own needs.
5. Control modeThere are two control modes, single action and automatic action. Commission can be done under the on condition of single action.
6. OperationSetting up and parameters revise even password modification and commission can all be done in touch screen.
7. Compressed airAir source pressure 0.5MPa~0.7Mpa(5Kgf/cm2~7Kgf/cm2)
8. MotorAC servo motor       750W    OMRON
9. Power supply

AC220V+/-5%      50Hz/60Hz

10. WeightAround 1100KG 
11. Dimension1300mm x 900mm x1570mm

Operation Guide

1. Basic operation

a. Turn on the air source supply to make the cylinder go back to initial position.

b. Turn on the air switch, get the power through, press the [running preparation" to make the machine go back to initial position.

c. Press [automatic", the machine will enter automatic turning status (must be done after the cutter setting finished). Press [pause" to check each action. It could begin automatic operation after cycle checking and find everything is normal.

d. Setting up dipping time (by touch screen). The pressing arm comes down while press [automatic" and oil injection begins. By the dipping time exhausts, oil injection stops accordingly. The oil injection volume could be controlled by the pressure release valve and throttle on the oil tank.

e. Press [Emergency" while abnormal operation appears.


Common breakdown analysis




If press start button,the breakdown alarm occurs

Check whether power source and air source are connected in a correct way

Check the air cylinder and circuit to see if the air pressure is 0.4-0.6Mp

Check the relevant travel switch as per the LCD screen display.  

Access to the operation preparation, press start button, the machine does not work.

Check if there are rotors on the feeding device. If yes, unload the rotors

Press start button after the cutter automatically return to the initial cutting position.

X,Z spindle forward and backward travel switch breakdown.

Press emergency stop, then access to X, Z spindle cutter setting page, manually adjust the cutter to the appropriate position..

Servo motor display alarm.

Turn off the power, the turn on the machine after two minutes

The cutting position is not fixed every time

Check if the coupler screw is loose.

The robot hand  doesn`t pick the rotor in the correct position.

The air pressure should be 0.4-0.6Mp

Check if the positioning screw of lower buffer is loose

Send message to this supplier
Ms. Annie (Sales Manager)
Tel: 86-574-87295639
Mobile: 86-13738869026
Enter between 20 to 3,000 chatacters.
Contact Method
Ningbo Nide Mechanical Equipment Co., Ltd.
14-5, East Kemao Center, Xiangyun Road, Hi-tech District, Ningbo, Zhejiang, China (Mainland) / 315040
Fax: 86-574-87295637
Didn't find what you're looking for? Post Buying Lead or contact our customer service specialist for help!
Buyer Help Center