Hexagonal wire mesh
Materials:
High quality low carbon steel wire, stainless steel wire, galvanized wire, PVC Coated wire, etc
Weaving and characteristics:
Obverse and reverse twisted, it is divided into electroplate galvanized, hot-dipped galvanized, (galvanized after weaving or galvanized before weaving) etc. It has the characteristics of corrosion resisting and oxidation-resisting.
Application:
Used widely in building, oil, chemical industry, breed, plant protect, food processing, reinforce, guard and heat keeping, for example, make net cast, stone cage, insulated net wall boiler cover, poultry fence, etc.
Assortments Available:
Hexagonal Wire mesh Electro Galvanized before Weaving
Hexagonal Wire mesh Electro Galvanized After Weaving
Hexagonal Wire mesh Hot Dipped Galvanized before Weaving
Hexagonal Wire mesh Hot Dipped Galvanized after Weaving
Hexagonal Wire mesh PVC Coated Before or After Weaving
Stainless Steel Hexagonal Wire mesh
Other Hexagonal Wire mesh
Specification:
General roll width: 2', 3', 4', 5', 6', 7'
General wire gauge (BWG): 14# to 26#
General specification: 1" 3/4", 1/2", 3/8",5/8", etc.
Galvanized hexagonal wire mesh | |||||
mesh | Min. Gal.v. G/SQ.M | Width | Wire Gauge (Diameter) BWG | ||
Inch | mm | Tolerance(mm) | |||
3/8" | 10mm | ±1.0 | 0.7mm - 145 | 2' - 1M | 27, 26, 25, 24, 23 |
1/2" | 13mm | ±1.5 | 0.7mm - 95 | 2' - 2M | 25, 24, 23, 22, 21 |
5/8" | 16mm | ±2.0 | 0.7mm - 70 | 2' - 2M | 27, 26, 25, 24, 23, 22 |
3/4" | 20mm | ±3.0 | 0.7mm - 55 | 2' - 2M | 25, 24, 23, 22, 21, 20, 19 |
1" | 25mm | ±3.0 | 0.9mm - 55 | 1' - 2M | 25, 24, 23, 22, 21, 20, 19, 18 |
1-1/4" | 31mm | ±4.0 | 0.9mm - 40 | 1' - 2M | 23, 22, 21, 20, 19, 18 |
1-1/2" | 40mm | ±5.0 | 1.0mm - 45 | 1' - 2M | 23, 22, 21, 20, 19, 18 |
2" | 50mm | ±6.0 | 1.2mm - 40 | 1' - 2M | 23, 22, 21, 20, 19, 18 |
2-1/2" | 65mm | ±7.0 | 1.0mm - 30 | 1' - 2M | 21, 20, 19, 18 |
3" | 75mm | ±8.0 | 1.4mm - 30 | 2' - 2M | 20, 19, 18, 17 |
4" | 100mm | ±8.0 | 1.6mm - 30 | 2' - 2M | 19, 18, 17, 16 |
Note:
1.) The above tolerance comply with standard EN10223-2:1997;
2.) Minimum Galvanization is only for typical wire diameter as stipulated separately in the column for your reference; Also it is only for hot dipped Galvanized Netting.
1.) The above tolerance comply with standard EN10223-2:1997;
2.) Minimum Galvanization is only for typical wire diameter as stipulated separately in the column for your reference; Also it is only for hot dipped Galvanized Netting.
PVC Coated Hexagonal Wire mesh | |||
Mesh | Wire Gauge (MM) | Width | |
Inch | MM | ||
1/2" | 13mm | 0.6mm - 1.0mm | 2' - 2M |
3/4" | 19mm | 0.6mm - 1.0mm | 2' - 2M |
1" | 25mm | 0.7mm - 1.3mm | 1' - 2M |
1-1/4" | 30mm | 0.85mm - 1.3mm | 1' - 2M |
1-1/2" | 40mm | 0.85mm - 1.4mm | 1' - 2M |
2" | 50mm | 1.0mm - 1.4mm | 1' - 2M |
We also offer other specifications you need | |||
.jpg)
.jpg)
.gif)
