Galvanized Hexagonal Wire Mesh
Application:
Application:
Used widely in building, oil, chemical industry, breed, plant protect, food processing, reinforce, guard and heat keeping, for example, make net cast, stone cage, insulated net wall boiler cover, poultry fence, etc.
Assortments Available:
Hexagonal Wire Netting Electro Galvanized before Weaving
Hexagonal Wire Netting Electro Galvanized After Weaving
Hexagonal Wire Netting Hot Dipped Galvanized before Weaving
Hexagonal Wire Netting Hot Dipped Galvanized after Weaving
Hexagonal Wire Netting PVC Coated Before or After Weaving
Stainless Steel Hexagonal Wire Netting
Other Hexagonal Wire Netting
Weaving and characteristics:
Weaving and characteristics:
Obverse and reverse twisted, it is divided into electroplate galvanized, hot-dipped galvanized, (galvanized after weaving or galvanized before weaving) etc. It has the characteristics of corrosion resisting and oxidation-resisting.
Specification:
Specification:
General roll width: 2', 3', 4', 5', 6', 7'
General wire gauge (BWG): 14# to 26#
General specification: 1" 3/4", 1/2", 3/8",5/8", etc.
Galvanized hexagonal wire netting | |||||
mesh | Min. Gal.v. G/SQ.M | Width | Wire Gauge (Diameter) BWG | ||
Inch | mm | Tolerance(mm) | |||
3/8" | 10mm | ±1.0 | 0.7mm - 145 | 2' - 1M | 27, 26, 25, 24, 23 |
1/2" | 13mm | ±1.5 | 0.7mm - 95 | 2' - 2M | 25, 24, 23, 22, 21 |
5/8" | 16mm | ±2.0 | 0.7mm - 70 | 2' - 2M | 27, 26, 25, 24, 23, 22 |
3/4" | 20mm | ±3.0 | 0.7mm - 55 | 2' - 2M | 25, 24, 23, 22, 21, 20, 19 |
1" | 25mm | ±3.0 | 0.9mm - 55 | 1' - 2M | 25, 24, 23, 22, 21, 20, 19, 18 |
1-1/4" | 31mm | ±4.0 | 0.9mm - 40 | 1' - 2M | 23, 22, 21, 20, 19, 18 |
1-1/2" | 40mm | ±5.0 | 1.0mm - 45 | 1' - 2M | 23, 22, 21, 20, 19, 18 |
2" | 50mm | ±6.0 | 1.2mm - 40 | 1' - 2M | 23, 22, 21, 20, 19, 18 |
2-1/2" | 65mm | ±7.0 | 1.0mm - 30 | 1' - 2M | 21, 20, 19, 18 |
3" | 75mm | ±8.0 | 1.4mm - 30 | 2' - 2M | 20, 19, 18, 17 |
4" | 100mm | ±8.0 | 1.6mm - 30 | 2' - 2M | 19, 18, 17, 16 |
Note:
1.) The above tolerance comply with standard EN10223-2:1997;
2.) Minimum Galvanization is only for typical wire diameter as stipulated separately in the column for your reference; Also it is only for hot dipped Galvanized Netting.
1.) The above tolerance comply with standard EN10223-2:1997;
2.) Minimum Galvanization is only for typical wire diameter as stipulated separately in the column for your reference; Also it is only for hot dipped Galvanized Netting.
PVC Coated Hexagonal Wire Netting | |||
Mesh | Wire Gauge (MM) | Width | |
Inch | MM | ||
1/2" | 13mm | 0.6mm - 1.0mm | 2' - 2M |
3/4" | 19mm | 0.6mm - 1.0mm | 2' - 2M |
1" | 25mm | 0.7mm - 1.3mm | 1' - 2M |
1-1/4" | 30mm | 0.85mm - 1.3mm | 1' - 2M |
1-1/2" | 40mm | 0.85mm - 1.4mm | 1' - 2M |
2" | 50mm | 1.0mm - 1.4mm | 1' - 2M |
We also offer other specifications you need | |||
.jpg)
.jpg)
.gif)
