The new 2010 Digital Guard Cam model now features on site image viewing from the wired remote. This is particularly useful in the initial positioning of the camera for maximum surveillance coverage.
The camera is about the same size as a normal PIR alarm detector, is weather proof and is programmed by a removable wire remote that is located at the base of the camera. The SD Memory Card, external power supply port and on/off switch are also located in this section. Powering this unit are 8 AA longlife batteries or a 6 Volt external power source.
Set on 3 megapixels the capacity of the 2gb card is 4,000 digital stills or 120 minutes of video.
The images are in colour in daylight and black and white at night. In daylight (colour) the distance for a clear photo image is 100 metres plus, at night (infrared B&W) the distance is from 12-15 metres.
The unit can be timed to turn on and off at any time over a 24 hour period, it can also be programmed to take images (still or video) in any time increments from 1 sec – 60 minutes. If for example there are animals constantly moving in front of the motion detector the camera will continually activate, it can be set to deactivate after the first image is taken and reactivate after the delay setting time is reached.
Image Sensor 5 Mega Pixels Colour CMOS Max. Pixel Size 2560x1920 Lens F=3.1; FOV=40? Auto IR-Cut-Remove (at night) IR-Flash 12m Memory SD Card 2GB Picture Size 5MP=2560x1920 3MP=2048x1536 Video Size 640px x 480px - 16fps 320px x 240px - 20fps Motion Sensor PIR with sensitivity level High/Normal/Low Operation Day/Night Response Time 1sec Camera Delays 4sec - 60min | Programmable Video Length 1sec - 60sec programmable Power Supply 8xAA recommended 4xAA as emergency power Stand-by Current Power Consumption 150mA (+450mA when IR-LED lighted) User Interface Keyboard with LCD display Interface TV; USB; SD card holder 6V DC external Operation Temperature -20°C to 55°C Storage Temperature -30°C to 60°C Operation Humidity 5% - 85% Security Authentication |
.jpg)
