Solar Module Test Chamber
| SPEC: |
| Model | TH-80
(A~F) | TH-150
(A~F) | TH-225
(A~F) | TH-408
(A~F) | TH-800
(A~F) | TH-1000
(A~F) | | Internal size W×H×D(cm) | 40×50×40 | 50×60×50 | 60×75×50 | 60×85×80 | 100×100×80 | 100×100×100 | | Outside measurement W×H×D(cm) | 120×165×115 | 130×170×125 | 140×185×130 | 165×195×155 | 185×200×175 | 190×210×185 | | Temperature range |
| Low temperature:(A:+25℃; B:0℃;C:-20℃; D:-40℃;E:-60℃;F:-70℃) | / | high temperature:100℃(150℃) | | | | | | | | |
| | Humidity scope | 20%—98% R.H.(10%~98%R.H);(5%—98%R.H Specially selects the condition) | | Warm humidity analysis precision/ Distributed precision | 0.1℃;0.1%R.H./±2.0℃;±3.0%R.H. | | Warm humidity control precision | ±0.5℃;±2.5%R.H. | | Elevation of temperature/temperature decrease time | Elevation of temperature approximately 4.0 ℃/minutes; Temperaturedecrease approximately 1.0 ℃/minutes | | In exterior material quality | Inside and outside a box of material quality is the SUS304#stainless steel plate system | | Heat preservation material quality | Thermostable high density chloro- formic acetic anhydridefroth insulator material | | Cooling system | single stage compressor (-20 ℃); Double sectioncompressor (-40 ℃ - -70 ℃) | | Safekeeping of security installment | The non- melt silk switch, the compressor over-load protection,the cold intermediary high and low pressure protection, the ultrahumidity ultra temperature protection, the fuse, the breakdown warningsystem, lacks the water to report to the police the protection | | Fitting | In the operation hole sets at the glass door (to select andpurchase), the recorder (selects and purchases), observes the Windows,50mm measures , In the PL box the lamp, the partition board, does thegauze, the foot wheel, horizontal foot rest | | Power | AC220V ,50/60Hz & 1∮ , AC380V ,50/60Hz 3∮ | | Weight (approximately) | 150KG | 180KG | 250KG | 350KG | 500KG | 520KG |
|
Certificate of these machines:
China official 3rd party calibration report
CE certiification
For the package:
1. PP film first
2. Vacuum package
3. PP film again
4. 10mm thickness PU foam to avoid collision
5. stronged plywood case
6. Standard ASLI CASE MARK
Our Main Products:
1) temperature humidity chamber
2) temperature fast change chamber (ESS chamber)
3) thermal shock chamber
4) temperture humidity combined salt spray chamber
5) temperture humidity combined vibration chamber
6) pressure accelerated aging chamber (PCT&HAST chamber)
7) high temperature aging chamber
8) sand and dust tester
9) rain/water spray chamber
10) salt spray chamber
11) UV climate resistant chamber
12) high temperature chamber/muffle furnace
13) vacuum oven
14) high frequency vibration tester
15) mechanical shock and impact tester
16) acceleration mechanical shock tester
