Single Board Computers

General:
Single-Board-Computer.(SBC) with ATX power supply and multiple on-board devices (Std. Ports, series, graphics, parallel, LANx3, Audio)

CPU:
Socket 370 ZIF socket for INTEL Celeron or Pentium III/VIA C3 (PGA and FCPGA case). Support wide range CPU types voltage and clocking frequency/ratio CPU Vcore between 1.3 and 2.1V CPU bus frequency 66/100/133 MHz Frequency, both can be configured as automatically or manually.

Chipset:
VIA VT8605 (Apollo PM133) NB. Integrated S3 Savage4 graphic coreVIA VT82C686B SB

Graphic:
Integrated graphic: S3 Savage4 Share Memory Architecture (SM) Output can be simultaneously displayed on CRT and LCDVGA BIOS combined with system BIOS.

Network:
Realtek RTL8139C Fast Ethernetor Intel 82559ER (Option)10/100 Mbit controller Support RJ45 connectors Support for Wake up on Lan.

Operating:
Operating Temperature: -0 degree C to + 50 degree C

I/O:
2xEIDE/UDMA 33/66/1000 I/F 1xCF
1xFDD I/F(SPP,ECP,EPP)
1xKeyboard (PS/2)
1xPS/2 mouse
2xUSB port
2xSerial RS-232 port, 1xPC104
3xLAN (10/100 Mbit)

Clock:
Realtime clock with ext. lithium battery into vibration resistant socket RTC year 2000 compliant and with correct BIOS support.

Sound:
AC97 compliant sound I/F of southbridge using AC97 audio codecAudio CODEC VIA VT1611A

RAM:
1 socket for DIMM (168-pin) Support for SDRAM, 133MHz buscolck Up to 1GB

Miscellaneous:
H/W status monitor (5 volt./ 3temps./3fans) hardware monitor chip CF (compact flash) disk option Temperature sensor for CPU.

Connectors:
Every Connector located at rear sideCombined, stacked PS/2 size conn. One DSUB Serial port,
One 10-pin
Header for KB and Mouse
RJ45 (10-pin) version
Parallel port
IDE ports
IDC wall conn. Fitting to 2.5 HDD I/F
FDD port
IDC std. Conn.
(SDUB) VGA port
Stacked USB conn.
Network port (RJ45)
Audio connections (in, out)
4x4 (5)-pin header
Operating elements (LEDs, switches)
ATX Connector PC 104 port
PCI

Condistions:
Rel. humidity: 90% non condensing
Storage temperature: -30 to +70 degree C