CUT Series inverter plasma cutter
1. High cutting speed and low cost; cutting speed increase to several time of autogenously cutter.
2. PWM modulating technology, high frequency, portable, handiness and energy saving.
3. Narrow and smooth cut-edge; not necessary for re-processing.
4. Durable welder less consuming of welding accessories.
5. Adopting no-contact arc starting cutting technique(70,100,120)
6. Adopting contacting arc starting cutting technique(30,40,60)
7. Can cut many sort of metal such as stainless steel, alloy steel copper ect.
CUT-40 Technical Data
Input power voltage(frequency) single phase 220V ±10% 50/60HZ
Rate input power capacity(K V A) 4.8
No-load voltage(V) 230
Output current adjustment range(A) 20-40
Rated output voltage(V) 96
Rated duty cycle(%)25 ℃ 60
No-load consumption(W) 40
Arc-start mode touch/non-touch
Efficiency(%) 85
Power factor 0.93
Weight(KG) 9
Measurement(mm) 371×155×295
Insulation class F
Protection class IP23
Exhaust 0.17
Max.cuting thickness(mm) 12
Packing:
Standard carton
CUT-60 Technical Data
CUT-60 Technical Data
Input power voltage(frequency) three phase 380V ±10% 50/60HZ
Rate input power capacity(K V A) 7.9
No-load voltage(V) 236
Output current adjustment range(A) 20-60
Rated output voltage(V) 104
Rated duty cycle(%)25 ℃ 60
No-load consumption(W) 50
Arc-start mode touch
Efficiency(%) 85
Power factor 0.93
Weight(KG) 18
Measurement(mm) 480×205×295
Insulation class F
Protection class IP23
Exhaust 0.25
Max.cuting thickness(mm) 23
Packing:
Standard carton
