Molybdenum spraying wire:
Molybdenum spraying wire is used as a thin coating on the surface of automobile components subjected to wear, such as piston rings, gearbox synchromesh parts, selector forks, etc. Molybdenum spraying wire is also sprayed onto machine parts such as bearing for repair purposes. Furthermore, molybdenum spray wire is applied as an intermediate layer.
Molybdenum spraying wire is used as a thin coating on the surface of automobile components subjected to wear, such as piston rings, gearbox synchromesh parts, selector forks, etc. Molybdenum spraying wire is also sprayed onto machine parts such as bearing for repair purposes. Furthermore, molybdenum spray wire is applied as an intermediate layer.
Appearance: Molybdenum spraying wire is covered with graphite. After removed graphite, it is metallic luster.
Molybdenum spraying wire Properties:
1. The weight of single wire is up to 20-25kg without any welded joint, which results in enhancing the efficiency and decreasing the operating costs.
Features: Very good interlaminar strength at strong thermal and mechanical loadings.
2. Wire Diameter:0.05mm-10.0mm, 0.002 Inch to 0.3937 Inch
3. Tolerance: 3.175mm + / -0.025mm or + 0 / -0.05mm
2.3mm-1. 45mm + / -0.02mm + 0 / -0.05mm
4. Tensile strength: >700-900N / mm2
5. Elongation: >20-5%
Wire Further Processing | Cut to length Wire |
Flat Wire | |
Square and Shaped Wire | |
Rewinding and spooling | |
Polishing and cleaning |
The Service Part has more information about Wire Further Processing.
