FeCrAl ALLOY FINEWIRES
Fe Cr Al alloy Fine Wires have high resistance, low temperature coefficient of electric resistance, high operating temperature, and good corrosion resistance under high temperature, especially under the atmosphere containing and/or sulfides.
Fe Cr Al alloy Fine Wires have high resistance, low temperature coefficient of electric resistance, high operating temperature, and good corrosion resistance under high temperature, especially under the atmosphere containing and/or sulfides.
Fe Cr Al Alloy Fine Wire has less hot strength than nickel alloys but much higher melting point and lower price. After being heated the alloy's plasticity becomes bad, easy brittleness, not to be easy to weld. However, If can be reasonably used, they also be a kind of ideal electric heating material. To ensure the quality of these very fine wires, the best materials and strict quality controll system were applied.
Fe Cr Al alloy Fine Wires are made of iron chromium aluminum base alloys containing small amounts of reactive elements such as yttrium and zirconium. The high aluminum content, in combination with the high chromium content causes the scaling temperature to increase up to 1425 C (2600F ).
Fe Cr Al alloy wires also have excellent oxidation properties at 800-1300° C because of the formation of a highly protective Al2O3 scale.
Fe Cr Al alloy wires also have excellent oxidation properties at 800-1300° C because of the formation of a highly protective Al2O3 scale.
Fe Cr Al alloy Fine Wires are used in many applications, Such as industrial electric furnace, household electrical appliance, electrical oven, electrical heater, infrared settings and far infrared ray device.
The available specifications from our factory are:
Please see the following chart about Fe Cr Al alloy wires' properties:
Type | 1Cr13Al4 | 0Cr25Al5 | 0Cr21Al6 | 0Cr23Al5 | 0Cr21Al4 | 0Cr21Al6Nb | 0Cr27Al7Mo2 | |
Chemical composition | Cr | 12.0-15.0 | 23.0-26.0 | 19.0-22.0 | 22.5-24.5 | 18.0-21.0 | 21.0-23.0 | 26.5-27.8 |
Al | 4.0-6.0 | 4.5-6.5 | 5.0-7.0 | 4.2-5.0 | 3.0-4.2 | 5.0-7.0 | 6.0-7.0 | |
Re | opportune | opportune | opportune | opportune | opportune | opportune | opportune | |
Fe | Rest | Rest | Rest | Rest | Rest | Rest | Rest | |
Maximal Temperature (oC) | 650 | 1250 | 1250 | 1250 | 1100 | 1350 | 1400 | |
Resistivity 20oC (10-6ohm*m) | 1.25 | 1.42 | 1.42 | 1.35 | 1.23 | 1.45 | 1.53 | |
Density(g/cm3) | 7.4 | 7.1 | 7.16 | 7.25 | 7.35 | 7.1 | 7.1 | |
Thermal conductivity (KJ/m*h*oC) | 52.7 | 46.1 | 63.2 | 60.2 | 46.9 | 46.1 | 45.2 | |
Extend strength (a*10-6/oC) | 15.4 | 16 | 14.7 | 15 | 13.5 | 16 | 16 | |
Melting point ( oC) | 1450 | 1500 | 1500 | 1500 | 1500 | 1510 | 1520 | |
Tensile strength(N/mm2) | 580-680 | 630-780 | 630-780 | 630-780 | 600-700 | 650-800 | 680-830 | |
Percentage elongation (%)) | >16 | >12 | >12 | >12 | >12 | >12 | >10 | |
Section shrink rate(%) | 65-75 | 60-75 | 65-75 | 65-75 | 65-75 | 65-75 | 65-75 | |
curve strength(F/R) | >5 | >5 | >5 | >5 | >5 | >5 | >5 | |
hardness (H.B.) | 200-260 | 200-260 | 200-260 | 200-260 | 200-260 | 200-260 | 200-260 | |
Microstructure | Ferrite | Ferrite | Ferrite | Ferrite | Ferrite | Ferrite | Ferrite | |
Magnetism | Magnetic | Magnetic | Magnetic | Magnetic | Magnetic | Magnetic | Magnetic | |
Wire Further Processing | Cut to length Wire |
Flat Wire | |
Square and Shaped Wire | |
Rewinding and spooling | |
Polishing and cleaning |
Product Description: The product produced by us is of good quality and is priced reasonably.
Competitive price: The labour cost and cost on procuring the raw materials is low and hence the manufacturing cost is reasonable. We provide high facility in short producing cycle and have strong adaptive capacity in producing variation of products.
High quality assured: The work done by us has a good command of advanced technological process in the respect of smelting, rolling, drawing and heat treatment up to finished products. The chemical analysis department, the physical testing department and the quality control department all operate an all-round monitoring of our products from raw materials to final products.
Packing Process & Transportation:
Packaging: Seal up, with plastic inside and wooden case or carton outside; or according to the customer's requirements.
Transportation: By air: Beijing International Airport OR By sea: Trianjin Seaport
We provide our customers with excellent services. If you want more detailed information of this product or related problems, please contact with us, we will reply as soon as possible (general in 24 hours).
