Shijiazhuang Minerals Equipment Co., Ltd is a professional slurry pump manufacturer in China. We engage in heavy duty and severe duty material handling solutions.
SH centrifugal slurry pumpsare mainly used to pump high-hardness, strong-corrosion and high-concentration liquids that contain suspended solid particles, such as finished ores, refuse ores, ashes, cinders, cements, mud, mineral stones and etc.
Specification:
·Size range (discharge)
1"1"1" to 18"
25 mm to 450 mm
1"1"1" to 18"
25 mm to 450 mm
·Capacities
to 22,000 gpm
to 5,000 m3/hr
to 22,000 gpm
to 5,000 m3/hr
·Heads
to 240 ft
to 73 m
to 240 ft
to 73 m
·Pressures
to 300 psi
to 2,020 kPa
to 300 psi
to 2,020 kPa
Structure Introduction:
1. SH slurry pump casingcarries replaceable wear-resistant metal or rubber liners. The impellers are made of wear-resistant metal or rubber. The liner of pump body and impeller for HH pump are made of hard metal only.
2. Bearing assembly is adoptable of cylindrical structure, it is easy to adjust the space between impeller and front liner .Can be removed completely when repaired. Bearing assembly use grease lubrication.
3. The shaft seal could use the packing seal, expeller seal and mechanical seal.
4. The pump discharge direction can be positioned at intervals of 45 degrees as request and oriented to any eight positions to suit installations and applications.
5. Drive types: V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices.
1. SH slurry pump casingcarries replaceable wear-resistant metal or rubber liners. The impellers are made of wear-resistant metal or rubber. The liner of pump body and impeller for HH pump are made of hard metal only.
2. Bearing assembly is adoptable of cylindrical structure, it is easy to adjust the space between impeller and front liner .Can be removed completely when repaired. Bearing assembly use grease lubrication.
3. The shaft seal could use the packing seal, expeller seal and mechanical seal.
4. The pump discharge direction can be positioned at intervals of 45 degrees as request and oriented to any eight positions to suit installations and applications.
5. Drive types: V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices.
.jpg)
