The QB model wafer knife gate is an uni-directional valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on suspended solids in industries such as:
Wastewater treatment plants
Chemical plants
Food and Beverage etc.
Wastewater treatment plants
Chemical plants
Food and Beverage etc.
Body:
Wafer style cast monoblock with raised face, with reinforced ribs in larger diameters for extra body strength. Internal cast-in gate wedges and guides allows for tighter shut-off. Full port design for greater flow capacity and minimal pressure drop. Internal design avoids any build up of solids that would prevent valve from closing.
Wafer style cast monoblock with raised face, with reinforced ribs in larger diameters for extra body strength. Internal cast-in gate wedges and guides allows for tighter shut-off. Full port design for greater flow capacity and minimal pressure drop. Internal design avoids any build up of solids that would prevent valve from closing.
Gate:
Stainless steel gate as standard. Gate is polished on both sides to avoid jamming and seat damage.Bottom of the gate edge is machined to a bevel to cut through solids for a tighter seal in the closed position. On request: thickness and/or material of the gate can be changed for higher pressure requirement.
Stainless steel gate as standard. Gate is polished on both sides to avoid jamming and seat damage.Bottom of the gate edge is machined to a bevel to cut through solids for a tighter seal in the closed position. On request: thickness and/or material of the gate can be changed for higher pressure requirement.
Epoxy coating:
The epoxy coating on all JCS cast iron and carbon steel valve bodies and components is electrostatically applied making the valves to be corrosion resistant with a high quality finished surface.
The epoxy coating on all JCS cast iron and carbon steel valve bodies and components is electrostatically applied making the valves to be corrosion resistant with a high quality finished surface.
Materials:
Body:WCB, 304, 316, 316L
Gate:2Cr13, 201, 304, 316, 316L
Stem:2Cr13, 304, 316
Sealing:EPDM, NBR, Viton, PTFE, Metal, Stellite
Note: Other materials can be supplied on clients' request.
Body:WCB, 304, 316, 316L
Gate:2Cr13, 201, 304, 316, 316L
Stem:2Cr13, 304, 316
Sealing:EPDM, NBR, Viton, PTFE, Metal, Stellite
Note: Other materials can be supplied on clients' request.