ANGESEN XPS TILE BACKER BOARD are of high performance, waterproof extruded polystyrene, faced with fiberglass mesh embedded into a cement polymer mortar on each side, which add extra strength and rigidity to the board.
Angesen boards can be used with all kinds of substrates and suitable for new-build and refurbishment project.
Angesen boards are totally waterproof and rot-resistant, making them the ideal solution for tiling wet areas like bathroom walls, showers and wet-rooms.
Angesen board is lightweight, easy to handle, easily cut and shaped with a sharp knife.
Angesen board will reduce the wasted heat loss into the sub-floor, saving time in bringing the flooring up to optimum temperature, with the added advantage of reducing electricity running costs.
Angesen boards can be bonded to the sub-floor or wall surface using tile adhesive and do not require any mechanical fixings for wooden sub-floors or plaster walls. For wood studding: only 10mm boards should be used, fixed with screws and washers.
Specification:
Thermal conductivity(5 years) | BS EN 13164 | 0.028~0.030watt/m·k |
Compressive strength | BSEN 826 | Minimum of 0.30 |
Bond strength | EN1348 | 0.3 |
Water absorption(by immersion) | EN12087 | 0.5% |
Water vapor permeability coefficient | DIN EN 12086 | 3.2m |
Resistance to soft body impact load | ETAG003 | 3*120Nm |
Bending strength 20mm 30mm | EN12089 | 601 1285 |
Size Tolerances Thickness Length Width | EN823 EN822 EN822 | ±1.5MM +2MM +1.5MM |
Flammability | DIN 4102 | B1/B2/B3 |
Quality management system | ISO9001 | ZSBC/08909Q0236ROS |
Dimensions:
Product | Thickness(mm) | Width(mm) | Length(mm) |
ANGESEN XPS-tile backer board | 6 | 600 | 1200/1220/1250 |
10 | 600 | 1200~2600 | |
12 | |||
12.5 | |||
20 | |||
30 | |||
40 | |||
50 | |||
60 | |||
70 | |||
80 | |||
100 |
Special sizes can be made according to customers' requirements.