•Two voice ports (RJ-11) for analog phones or Fax machines
•Impedance Agnostics - 8 Configurable Settings
•Call Waiting, Cancel Call Waiting, Call Waiting Caller ID
•Caller ID with Name/Number (Multi-national Variants)
•Caller ID Blocking
•Call Forwarding: No answer, Busy, All
•Do Not Disturb
•Call Transfer
•Three-way Conference Calling with Local Mixing
•Message Waiting Indication - Visual and Tone Based
•Call Return
•Call Back on Busy
•Call Blocking with Toll Restriction
•Delayed Disconnect
•Distinctive Ringing - Calling and Called Number
•Off-hook Warning Tone
•Selective/Anonymous Call Rejection
•Hot line and Warm Line Calling
•Speed Dialing of 8 Numbers/Addresses
•Music on Hold
Specification
Model | PAP2T •Unlocked, Brand new •With same MAC address on label and firmware inside. No problem for auto provision. •Free to do pre-configure |
Data Networking | MAC Address (IEEE 802.3) IPv4 - Internet Protocol v4 (RFC 791) upgradeable to v6 (RFC 1883) ARP - Address Resolution Protocol |
DNS - A Record (RFC 1706), SRV Record (RFC 2782) | |
DHCP Client - Dynamic Host Configuration Protocol (RFC 2131) | |
ICMP - Internet Control Message Protocol (RFC792) | |
TCP - Transmission Control Protocol (RFC793) | |
UDP - User Datagram Protocol (RFC768) | |
RTP - Real Time Protocol (RFC 1889) (RFC 1890) | |
RTP - Real Time Protocol (RFC 1889) (RFC 1890) RTCP - Real Time Control Protocol (RFC 1889) DiffServ (RFC 2475), Type of Service - TOS (RFC 791/1349) SNTP - Simple Network Time Protocol (RFC 2030) | |
Voice Gateway | SIPv2: Session Initiation Protocol v2 (RFC 3261, 3262, 3263, 3264) SIP Proxy Redundancy - Dynamic via DNS SRV, A Records Re-registration with Primary SIP Proxy Server SIP Support in Network Address Translation Networks - NAT (incl. STUN) Secure (Encrypted) Calling via Pre-Standard Implementation of Secure RTP Codec Name Assignment |
Voice Algorithms | G.711 (A-law and u-law) , |
G.726 (16/24/32/40 kbps), | |
G.729 A, | |
G.723.1 (6.3 kbps, 5.3 kbps) | |
Dynamic Payload | |
Adjustable Audio Frames per Packet | |
Fax Capability | Fax Tone Detection Pass-Through |
Fax Pass-Through - Using G.711 | |
DTMF: In-band & Out-of-band (RFC 2833) (SIP Info) | |
Flexible Dial Plan Support with Interdigit Timers and IP Dialing | |
Call Progress Tone Generation | |
Jitter Buffer - Adaptive | |
Frame Loss Concealment | |
Full Duplex Audio | |
Echo Cancellation (G.165/G.168) | |
VAD - Voice Activity Detection with Silence Suppression | |
Attenuation / Gain Adjustments | |
Flash Hook Timer MWI - Message Waiting Indicator Tones | |
VMWI - via FSK | |
Polarity Control | |
Hook Flash Event Signaling | |
Caller ID Generation (Name & Number) - Bellcore, DTMF, ETSI | |
Music on Hold Client | |
Streaming Audio Server - up to 10 sessions | |
Security | Password Protected System Reset to Factory Default |
Password Protected Admin and User Access Authority | |
Provisioning/Configuration/Authentication: | |
HTTPS with Factory Installed Client Certificate | |
HTTP Digest - Encrypted Authentication via MD5 (RFC 1321) | |
Up to 256-bit AES Encryption | |
Provisioning, Administration & Maintenance: | Web Browser Administration & Configuration via Integral Web Server |
Telephone Key Pad Configuration with Interactive Voice Prompts | |
Automated Provisioning & Upgrade via HTTPS, HTTP, TFTP | |
Asynchronous Notification of Upgrade Availability via NOTIFY | |
Non-intrusive, In-Service Upgrades | |
Report Generation & Event Logging | |
Stats in BYE Message | |
Syslog & Debug Server Records - Per Line Configurable Web Browser | |
Physical Interfaces: | 1 10BaseT RJ-45 Ethernet Port (IEEE 802.3) |
2 RJ-11 FXS Phone Ports - For Analog Circuit Telephone Device (Tip/Ring) | |
Subscriber Line Interface Circuit (SLIC): | Ring Voltage: 40-55 VRMS Configurable * |
Ring Frequency: 10 Hz - 40 Hz * | |
Ring Waveform: Trapezoidal and Sinusoidal * | |
Maximum Ringer Load: 3 REN | |
On-hook/off-hook Characteristics: On-hook voltage (tip/ring): -50 V NOMINAL Off-hook current: 25 mA min Terminating Impedance: 8 Configurable Settings including North America 600 ohms, European CTR21 | |
Regulatory Compliance: | FCC (Part 15, Class B), cUL, CE, IC-003, A-Tick |
Power Supply: | DC Input Voltage: +5 VDC at 2.0 A Max. |
Power Consumption: 5 Watts | |
Switching Type (100-240v) Automatic | |
Power Adapter: 100-240v - 50-60Hz (26-34VA) AC Input, 1.8m cord | |
Indicator Lights/LED: | Phone1, Phone2, Internet, Power |
Difference between PAP2 NA and PAP2T NA:
PAP2 | Blue LED light | G.711 a-law, G.711u-law, G.726, G.729 A, G.723.1 | The PCB boards are different (different IC). |
PAP2T | Green LED light | G.711 (A-law and u-law) ,G.726 (16/24/32/40 kbps),G.729 A,G.723.1 (6.3 kbps, 5.3 kbps),Dynamic Payload, Adjustable Audio Frames per Packet |
Environmental
Dimensions | 3.98" X 3.98" X 1.10" (101 X 101 X 28mm) |
Unit Weight | 5.40 oz. (153g) |
Operating Temp. | 32 to 113ºF (0 to 45ºC) |
Storage Temp. | -77 to 158ºF (-25 to 70ºC) |
Operating Humidity | 10 to 90% Non-condensing |
Storage Humidity | 10 to 90% Non-condensing |
Standard Component:
Item | Qty | Remarks |
Phone Adapter PAP2T NA | 1 | |
Manual | 1 | Printed |
Ethernet Cable | 1 | |
Power Supply | 1 |
Packingwith colorful box
G.W./unit | 0.5kg |
Carton MEAS | 58*54*34cm |
G.W. | 21kg |
PCS/CTN | 40pcs |
The Linksys Internet Phone Adapter enables high-quality feature-rich VoIP (Voice over IP) service through your broadband Internet connection. Just plug it into your home router or gateway and use the two standard telephone ports to connect analog phones or fax machines. Each phone port operates independently, with separate phone service and phone numbers, like having two telephone lines. You'll get clear reception and reliable fax connections, even while using the Internet at the same time.
With Internet telephony, along with low domestic and international phone rates, an impressive array of special telephone features is available. Choose your preferred local dialing number, regardless of where you live. Or add a virtual telephone number to have forwarded to your Internet phone. You can even add a toll-free number. The Linksys Internet Phone Adapter is compatible with these and all of the other special telephone features that are available from your Internet telephone service provider, such as Caller ID, Call Waiting, Voicemail, Call Forwarding, Distinctive Ring, and much more.