Ultrasonic Cleaing machine for hardware parts before plating
The manufacturer will do endless improvement, please contact us for updated
Ø Application | ||
to do cleaing for brass products before plating, like tap, faucet nut and something like this kind of hard | ||
Ø Character | ||
Auto frequency tracking function, which have advantage of automatic find the best ultrasonic performance for different cleaning parts This machine can connect with remote control | ||
Ø Detailed parameter | ||
Name | Brass products Ultrasonic Cleaning machine | |
Model | KLE-1073 | |
Vibrators | 73pcs | |
Auxiliary | cleaning basket | |
Ultrasonic power | 4.4KW | |
Heating power | 9KW | |
Vibrator standard | 28khz/40khz,50W/60w/pc (optional) | |
Power supply | 380V/220V,50HZ/60HZ (optional) | |
Size of inner cleaning tank | 1200*600*1200mm(L*W*H) | |
Size of outside | 1500*800*1500mm | |
Capacity | 600L (only 300L is necessary) | |
Control mode | Mechanical | |
Heating temperature | 0 up to 110 adjustable | |
Vibration mode | Bottom vibration | |
Heating mode | Heating board at two sides | |
Cleaning basket | Stainless steel, the mesh over 10*10mm | |
Switch | Separated Power Switch, Ultrasonic SW and Heating SW | |
Configuration | Assembled Four Universal wheel | |
Separated lid/Cap | ||
With cleaning Basket | ||
Each generator has power wire of 5m | ||
High Q value(NTK made in Japan) Vibrators | ||
Stainless steel Drain valve assembled under the bottom | ||
Automatic frequency tracking Generator | ||
Over-current protection | ||
Soft-start function | ||
Ø Material | ||
Inner cleaning tank | SUS304L,2.0mm | |
Vibrating side | SUS 304L,2.5mm | |
Surrounded outside | SUS 304L,1.0mm | |
Base support | Stainless steel Square tube 38mmx38mm,1.5mm | |
DC Connector | no, low voltage power connection | |
Ø Process standard | ||
Vibration side | Hard chrome plated over 0.05mm | |
Appearance | No glitches, no corners, smooth, beautiful | |
Inner cleaning tank | Well welded, upright, water-proof | |
Welding spot | No burn marks, welding marks after polishing | |
Fixed screw | Ball head smooth | |
Assembled mode of vibrator | Glued + Screwed | |
Heating rod | Well insulated, short-cut protected | |
Ø Free spare parts | ||
Separated generator, heating rod, fuse | ||
Ø Packing | ||
Wooden case with pallet, easy operated by fork Supported under the bottom avoid impacting during delivery Stretch seal around | ||
.jpg)
.jpg)
.jpg)
