We provide both two and three Phase Water/Oil/Gas Separators, like Test Separator, Production Separator and Filter Separator.
Performance and Application:
l Used for dewatering, degassing and sand removal from crude oil
l Any water content of inlet crude oil are applicable.
l Any contents of oil and gas are applicable;
l Crude oil density is less than 980 Kgs per cubic meter
l Operating temperature is from -10 to 60°C
l Operating pressure from 0.3 to 8.0Mpa
l Processing capability is from 10 to 10,000 cubic meters per day
l Dimensions of the tanks from OD2.2 m x 10 m to OD 3.2 x 18 m
l Average water content in purified crude oil is less than 0.5%
l Average gas content in purified crude oil is less than 0.005g per cubic meters
l Oil content in the treated water is less than 50ppm
Advantages
l Embedded by pulse electric field. More than 90% of crude oil removal clean water once.
l Save the coalescence poling board and packing, Can make the equipment volume reduced by 66.7% and weight reduced by 50%.
l Through the efficient components can remove the capture of gases. With more than 10μm diameter 99% of droplet, gas fluid containing less 0.03 g meet for requirements.
l Using the inclined plate and the pressure inside the process that exclude, to improve the efficiency of clay sand (except (size) > 30μm. Except sand ratio (98%), ensure containers not accumulate sand (mud).
l Using the computer intelligent control, automation system.
l Traditional three-phase separation technology simplified,After the optimization process level, Improve production efficiency.
