Product name:PU Series Solenoid Valve
| Model | PU220-01 | PU220-02 | PU220-03 | PU220-04 | PU220-06 | PU220-08 |
| working medium | Air, Water,oil | |||||
| Motion Patterm | 220:Direct Drive Type,225:Guide Type | |||||
| Type | Normal Close Type | |||||
| Aperture Of Flow Rate(mm) | 1.5 | 2.3 | 8 | 13 | 20 | 25 |
| CV Valve | 0.10 | 0.18 | 1.00 | 4.00 | 8.60 | 11.00 |
| Joint Pipe Bore | G1/8" | G1/4" | G3/8" | G1/2" | G3/4" | G1" |
| Operation Fluid Viscosity | 50CST | |||||
| Working pressure | 0-0.7Mpa | |||||
| Max.Pressure Resistance | 1.05Mpa | |||||
| Operating Temperature | below Zear 5- 80.C | |||||
Solenoid Valve Installation Notes:
1 the installation should pay attention to the arrow on the valve body should be consistent with the medium flow. There can not be installed in direct dripping or splashing water. Solenoid valve should be installed vertically upward.
2 solenoid valve should ensure that the supply voltage is the rated voltage fluctuation range of 15% -10% of normal work.
3 Solenoid valve is installed, the pipeline must not have reverse pressure differential. And the required power for several times, so that proper temperature before officially put into use.
4 Solenoid valve piping should be thoroughly cleaned before installation. Pass into the media should be free of impurities. Valve pre-installed filters.
5 When the solenoid valve malfunction or cleaning, to ensure the system continues to run, you should install the bypass device.
