Managed Media Converter System

Payment Terms: T/T
Trade on HiSupplier, Worry Free Guarantee
Trading safety, secure your money, lower the risk, protect both buyers and suppliers
HiSupplier is a Chinese multinational company in U.S, it helps to coordination and order landing.
More ›
  • Product Details
  • Company Profile
  • Product Reviews
Basic Info.
  • Model No.: OnAccess200X 
  • Place of Origin: Guangdong  
  • Min.Order: 1 Piece/Pieces
  • Means of Transport: Air
Supply Capacity
  • Production Capacity: 500pieces/week
  • Packing:standard packing
  • Delivery Date: 2-4weeks
 
OnAccess2000 is a high performance, cost effective and carrier grade manageable media converter system. It is intended for the point-to-point fiber-to-the-premises (FTTx) applications and forbridging the gap between legacy copper andfiber infrastructures. The available add-on modules for OnAccess2000 are as below:
          OnAccess2001 FE MC:  Managed Fast Ethernet Media Converter (including local card and remote unit)
          OnAccess2002 GE MC: Managed Gigabit Ethernet Media Converter (including local card and remote unit)
          OnAccess2004 GE MC4: Managed Multiple Gigabit Ethernet Media Converter (including local card and remote unit)
          OnAccess2008 GE MUX: Managed Multi-Port Fast Ethernet Media Converter (including local card and remote unit)
       Available with stand-alone, chassis ormulti-port configuration, the OnAccess 200x media converter products offer copper to fiber and fiber to fiber media conversion in the following supported protocols: Ethernet, Fast Ethernet and Gigabit Ethernet.Other media and protocol conversion will be supported in future releases.
     The advanced industrial features, such as Auto-Negotiation, Auto-MDI/X, Link Fault Pass-Through (LFP), Remote Fault Detection (RFD) and Dying Gasp Alarm,make more efficient troubleshooting and less on-site maintenance. OnAccess200x provides remote loopback and in-band TS-1000 or Ethernet packet-based OAM capabilities to manage subscriber access network from carrier center side to terminal side, while the embedded management software allows administrators to easily configure features, monitor performance and troubleshoot the system using command line interface, standard Web browser or Simple Network Management Protocol (SNMP) based network management platform.
      Since FirstMile won the bid for supplying optical access equipment to PCCW Hong Kong in October 2007, OnAccess200x series products have been widely deployed by PCCW to offer wideband fiber access services to its top clients, such as security companies,bank units and etc..
Product Highlights
          Each standard chassis contains up to 15 media converter (MC) slots plus one network management card (NMC) slot.
          Up to four chassis managed by a single management unit with one master management card plus three slave management cards.
          In-band network management (OAM) communication with TS-1000 standard or special Ethernet packet to manage subscriber access network from carrier center side to terminal side.
          OnAccess2001 FE MC Modules provide 10BASE-T or 100BASE-TX to 100BASE-FX fiber conversion, and available with multimode, single-mode, and single-fiber options with fixed fiber optic transceiver or SFP module.
          OnAccess2002 GE MC Modules provide two SFP ports for 10/100/1000BASE-TX to 1000BASE-X media conversion or 1000BASE-X to 1000BASE-X conversion.
          OnAccess2004 GE MC4 Modules provide four SFP ports for 10/100/1000BASE-TX to 1000BASE-X media conversion or 1000BASE-X to 1000BASE-X conversion.
          OnAccess 2008 GE MUX Modules provide 2G+8 ports, supports two SFP based 1000BASE-X Automatic Protection Switch (APS) links between local and remote converter to offer 8 truly isolated 10/100BASE-TX ports of CAT5 links over the highly reliable APS fiber pair, and supports multiple port 10/100BASE-TX to 1000BASE-X media aggregation.
          Variety SFP options for 100BASE-FX and 1000BASE-X with SFP internal ID and status monitoring capability.
          Non-blocking store-and-forward architecture enables the forwarding rate to proceed at a full wire speed.
          802.3x flow control for a full-duplex mode and collision-based backpressure for a half-duplex mode.
          Egress/Ingress rate management control with 128Kbps granularity.
          Optional automatic converter switchover protection.
          Programmable link fault pass-through (LFP) or remote fault detection (RFD) function.
          Remote power on / off detection with dying gasp alarm.
          Remote loopback capability for link integrity test.
          Dual processor management card to maximize system performance.
          Dual power supply of load sharing or 1 + 1 automatic over feature with over-voltage / under-voltage alarms.
          Dual fans with monitoring and alarm features.
          Standard 19 inch rack mount.

Network Management
Remote In Band: SNMP, Web-based HTTP and Telnet.
Local Out of Band: RS-232 Console.
Network Protocol and Standards
IEEE: 802.3, 802.3u, 802.3z, 802.3ab, 802.3ah, 802.1p, 802.1q, 802.3ad, 802.3x
IEFT: RFC1157 SNMP, RFC854 Telnet, RFC 1123/1493/1643 MIB
Power Supply Options
AC90~264V/1.2A max, 50/60Hz, or
DC36~72V/1.5A
Power Consumption: ~35W
Physical and Environmental
Dimensions:
Standard Chassis: 19-inch rack-mount width, 2.0U height, with up to 15 media converter (MC) slots plus one network management card (NMC) slot.
Mini Chassis: 11-inch rack-mount width, 2.0U height, with up to 6 media converter slots plus two media converter and power module shared slots and one network management card slot.
Weight: 9Kg
Operating temperature: 0 ℃ ~ 50 ℃
Storage temperature: -25 ℃ ~ 85 ℃
Humidity: 5% ~ 95% RH Non-condensing.
Port Configurationand Optical Interface Options
OnAccess2001 FE MC
One 10/100Base-TX RJ45 port
One 100Base-FX SC port with single or dual fiber option
Single single-mode fiber, dual wavelength 1310 / 1550nm, SC connector, 15/25/40/60 km reach
Dual single-mode fibers, single wavelength 1310 or 1550nm, SC connector, 15/25/40/60 km reach
Dual multi-mode fibers, single wavelength 1310nm, SC connector, 2 km reach
Refer to SFP specifications for the SFP interface option
OnAccess2002 GE MC
Two SFP ports, with10/100/1000Base-TX RJ45 port and 1000Base-X SC or LC port with single or dual fiber option
Refer to SFP specifications for the SFP interface option
OnAccess2004 GE MC4
Four SFP ports, with10/100/1000Base-TX RJ45 port and 1000Base-X SC or LC port with single or dual fiber options
Refer to SFP specifications for the SFP interface option
OnAccess2008 GE MUX
Two SFP ports, with10/100/1000Base-TX RJ45 port and 1000Base-X SC or LC port with single or dual fiber option
Eight 10/100Base-TX RJ45 ports
Refer to SFP specifications for the SFP interface option
Ordering Information
Chassis Frame
OnAccess2000-CF:
Standard 19-inch rack-mount width, 2.0U height, with up to 15 media converter (MC) slots plus one network management card (NMC) slot, dual power supply and dual fan
OnAccess2000-CF-MINI:
11-inch rack-mount width, 2.0U height, with up to 6 media converter slots plus two media converter and power module shared slots, one network management card slot and dual fan
Management Card
OnAccess2000-MC:
OnAccess2001 FE MC: Managed Fast Ethernet Media Converter
Local Card:  OnAccess2001L
OnAccess2002 GE MC: Managed Gigabit Ethernet Media Converter
Local Card:  OnAccess2002L
OnAccess 2004 GE MC4: Managed Multiple Gigabit Ethernet Media Converter
Local Card:  OnAccess2004L
OnAccess 2008 GE MUX: Managed Multi-Port Fast Ethernet Media Converter
Local Card:  OnAccess2008L
Remote Unit: OnAccess2008R

Send message to this supplier
Ms. Maggie Lin
Tel: 86-0755-26716878
Enter between 20 to 3,000 chatacters.
Contact Method
Shenzhen First Mile Communications Ltd.
China (Mainland)
Didn't find what you're looking for? Post Buying Lead or contact our customer service specialist for help!
Buyer Help Center