Plastic Profile Extrusion Production Line
Plastic Profile Extrusion Line
1. Material can be extruded out directly after two grades of mixing, and it can also be extrueded by two steps after pelleting.
2. The line is of characteristics of energy and space saving.
3. The line is consisted of conical twin screws extruder, caccum calibration table, haul-offunit, and stacker, and also coorinated with different kindls of moulds to producePVCdoor and profile
This plastic machine is the manufacture facilities of PVC plastic profile material, including window and door series profile plate, sheet, tiny bubble profile and tiny bubble ornament plate.
The big shape plastic door and window profile production line is developed by our corporation with introduction of advanced technology form abroad, forming a complete system with twin conical screw extruder, it features high automation degree, smooth work performance, big yield and high efficiency.
Plastic Profile Extrusion Line
1. Material can be extruded out directly after two grades of mixing, and it can also be extrueded by two steps after pelleting.
2. The line is of characteristics of energy and space saving.
3. The line is consisted of conical twin screws extruder, caccum calibration table, haul-offunit, and stacker, and also coorinated with different kindls of moulds to producePVCdoor and profile
This plastic machine is the manufacture facilities of PVC plastic profile material, including window and door series profile plate, sheet, tiny bubble profile and tiny bubble ornament plate.
The big shape plastic door and window profile production line is developed by our corporation with introduction of advanced technology form abroad, forming a complete system with twin conical screw extruder, it features high automation degree, smooth work performance, big yield and high efficiency.
MODEL | YF180 | YF240 |
Vacuum degree (MPa) | -0.08--0.09 | -0.08--0.09 |
Center height of T type dies (mm) | 320 | 320 |
Height from ground to die (mm) | 890-1100 | 890-1100 |
Moving distance of vacuum calibration table (mm) | 400 | 500 |
Hauling speed (m/min) | 0.3-7.8 | 0.1-4 |
Hauling force (KN) | 7.5 | 30 |
Effective hauling length (mm) | 1.0 | 1.8 |
Width of rubber (mm) | 180 | 240 |
Cutting linear velocity (m/s) | 58.6 | 58.6 |
Max. Cutting section (mm) | 180×65 | 240×65 |