Applications
1. All power parameter measurement,
Current, Voltage, Frequency,
Active power, Reactive power, Apparent power,
Energy, Power factor,
2. Power factor measurement and control
3. Energy Measurement
4. Replace the three-phase power meter, three phase electricity transmitter
5. Transformers, generators, capacitors and electric motors distributed detection
6. Medium and low pressure systems
7. SCADA, EMS, DCS integrators
8. Use Modbus to set programming and read the data.
9. Based on this power meters, can simply set up a monitoring system, that only use the IPC and central software,
Technical Indicators
1. Power Supply
Voltage: Rated 220V (optional 57.7V/100V/380V)
Current: Rated 5A (optional 1A)
Frequency :45-65Hz
2. Load
Voltage: <0.5VA / phase (rated 220V)
Current: <0.5VA / phase (rated 5A)
3. Overload
Current: 2 times rated continuous; 10 seconds for 10 times the rated
Voltage: 2 times the rated continuous; 10 seconds for 600V
4. Measurement
3-phase 3-wire, 3 phase 4 wire, 1 phase 2 wire
PT: 1~5000
CT: 1~2000
5. Display
LED / red, 3 line of 5 numerals
Display can be set to manual / automatic scanning
6. Communication
RS485
MODBUS(RTU mode)
Baud Rate: 1.2k/ 2.4k/ 4.8k/ 9.6k/ 19.2k
Address: 1~254
7. Work environment
Temperature: -20℃~ +60℃
Humidity: RH 20%~95%(No condensation)
8. Protection
Panel :IP40
9. Storage Conditions
Temperature:-25℃~+70℃
Humidity: RH 20%~95%
12. Dimensions
L × W × H =120mm×120mm×116mm
13. Installation hole size
L × W =110+1mm×110+1mm
.jpg)
.jpg)
