1,000W High Pressure Sodium Bulb:
- Power: 1,000 watts (High efficiency)
- Expected Life Span: 24,000 hours
- Lumen: 125,000 lumens
- Color Temperature: 2,100K
- Contains more red spectrum, which is best for flowering.
- Non-luring insects
- Strong power to penetrate fog
- High output, high luminescence efficiency.
- Fit for all standard 1,000 watts HPS grow light systems
- Fit for the Heliophile, such as Rose and Camellia, which grows better at longer sunshine time.
1,000W Digital Electronic Ballast:
- High power 1,000 watts
- Built-in cooling fan and heat output holes.
- Built-in standard reflector interface
- Fit for 1,000 watts High Pressure Sodium Lamps or 1,000 watts Metal Halide Lamps
- Pass FCC and CE Certificate
- Low Noise
- Energy saving and environmental friendly
- Stabilize input power and output luminous flux
- Reduce wastage and improve usable efficiency of power supply equipment capability
- Shielded component to protect against Radio Frequency Interference to other equipment
- Prevent the electricity from striking the bulb repeatedly and make the bulb nigrescence prematurely
- Protect your eyes when continually working
- Rated Power: 1,000 watts
- Specified Frequency: 50/60Hz
- Working Voltage Range: 120V/240V
- Install Space Requirement: 14-1/2in. x 6in. x 3-3/4in. (37cm x 16cm x 10cm)
- With a 8-1/3ft. power cord to wall (US standard plug)
- Safe and easy to use
- Ensure timer is disconnected from power supply.
- Press down the segment pushbuttons according to how long you require the system to stay on.
- Each segment is 15 minutes.
- Turn the timer dial until the black pointer is set to the present time.
- Plug in your grow light system to the timer and then the timer to the power supply socket and switch the socket on.
- Timer and your light system go working till the stop time.
- The timer can be overridden by moving the red switch on the side.
- Timer Power: Max Wattage 1725W; Max Current 15A/120V/60Hz
