Product Name:mobile anti-theft alarm holder/stand
This elegant Security alarm holder for mobile , high practical, the use of UV surface treatment technology.
Now widely used in various types of mobile phones, cameras, MP4 and other Consumer Electronics products for Mobile phone supermarkets, used for loss prevention security of telecom mobile Unicom, digital city, digital camera counters, GPS counters, MP4 counters, appliances hypermarkets, supermarkets and various small electronic products exhibition of digital
2.Technical parameter
1.Product Height: 100 * 65 * 145MM
2.Internal Battery type: 3.7V rechargeable lithium battery.
3.External power adapter: DC5V 1000MA
4.Battery Standby Time: 2 months
5 Charge indicator: charging in red , full in green
6.Alarm sound: 105DB.
7. Alarm indication: LED red flashes.
8. Shell Material: ABS
9. Shell Color: bright black , pearl white
3.Function:
1) Host Base with Charging Function, Charging monthly , Repeated use.
2)Display Charging Function apply to : Mobile Phone , DC camera , Tablet PC
3)Disconnection Alarm Function: Three Contacts disconnection alarm
4)Low Voltage Alarm Function :Voltage Less 3.3V Alarm ,remind the charging
5)Short Circuit Alarm Function : circuit is short-circuited ,automatic alarm
6)Infrared Remote Control Function : Remote Start and Disarm the Alarm.
7)Installation Method : Double ways in 3mm adhesive or use screws tighten.
4.Packaging materials
1).Individual Packing: PE , PCS, the color- box packing , size 170 * 120 * 80MM
2).Carton packing: standard export carton, size: 50 * 35 * 19CM.
3).NW/pc :160G
4).GW/pc:330G
5).NW/CTN: 5.3KG
6).GW/CTN :6.1KG
5. Products installation
1.Clean the display case, then turn on switch on the bottom of Security alarm holder for mobile host, adhere the bottom of the anti-theft frame with 3M adhesive tape to the exhibit cabinet. Or use two anti-theft screws to connect the cabinet frame and tighten the exhibition (open f the screw hole cover firstly)
2.Connect the charger of Security alarm holder for mobile with the alarm host, the other end into the power socket in preparation for a fixed monthly charge.
3.Tear off the 3 adhesive tape from the Anti-Theft Terminal product display and paste exhibit's back fastened
4.Tear off 3M adhesive from the sensor probe, stick tight with the obverse of the product
5.Take out the Infrared remote control board , tear off the battery insulation sheet underneath. Press the ON key , the host switch on ,enter the preset alarm status
6.The installation is set up
