Introduction:
The RTC70 XX is used for 2-position control with on/off output for the control the temperature by means of an NTC sensor Placed externally or internally in the thermostat
The thermostat acquires the room temperature with its built-in sensor or floor sensor.and the heating contact will close when the room tem Perature falls below theselected setPoint
Application:
For the control of warm-water(floor) heating systems and direct electric heating systems used in Commercial buildings,Residential buildings, Light industrial buildings
Features:
1. LED indicator is light when heating is on
2. With manual switch and knob for easy operation
3. On/off control output for heating device
Technical data:
1. Voltage: AC230V
2. Power consumption: 5W
3. Setting range: 4°C-45°C
4. Switching differential: +/-0.5K
5. Ambient temPerature: -5°C-50°C
6. Protective housing: IP20
7. Housing material: self—extinguishing PC
8. Floor sensor: rubber-thermoplastic NTC sensor
9. Cablelength is 3m
The RTC70 XX is used for 2-position control with on/off output for the control the temperature by means of an NTC sensor Placed externally or internally in the thermostat
The thermostat acquires the room temperature with its built-in sensor or floor sensor.and the heating contact will close when the room tem Perature falls below theselected setPoint
Application:
For the control of warm-water(floor) heating systems and direct electric heating systems used in Commercial buildings,Residential buildings, Light industrial buildings
Features:
1. LED indicator is light when heating is on
2. With manual switch and knob for easy operation
3. On/off control output for heating device
Technical data:
1. Voltage: AC230V
2. Power consumption: 5W
3. Setting range: 4°C-45°C
4. Switching differential: +/-0.5K
5. Ambient temPerature: -5°C-50°C
6. Protective housing: IP20
7. Housing material: self—extinguishing PC
8. Floor sensor: rubber-thermoplastic NTC sensor
9. Cablelength is 3m
