With the embedded16-Bit digital to analog converter, which controls output voltage/current, and 24-Bit analog to digital converter, which reads output voltage/ current and high accuracy voltage reference resources, users attain precise input and output figures.
The HT2600 also achieves higher accuracy by its software calibration, which avoids errors caused by manual operations.
In terms of over voltage/current protection (OVP/OCP), the HT2600 rapidly detects a problem by utilizing a combination of software configuration and hardware detection, which ensures connected objects against damages if any problem occurs.
Features:1. Individual operative design of 3-channel output terminals2. Stable output regulation with low noise and high precision3. High resolution of output/Read capabilities: Voltage= 1 mV. Current= 100uA.4. Remote Sense compensation5. Front panel and rear panel output terminals6. Back lighted 160x160 LCD display7. Over-voltage, over-current and over-temperature protection8. Short circuit and reverse polarity Protection9. Intelligent Fan control10. Auto Run mode and delay time setting functions11. Parallel Connection , Series Connection and track modes12. 100 configurable and recallable states in the memory13. Output ON/OFF delay time function14. ON/OFF control at the output terminals15. Standard RS-232C and USB interfaces16. Optional GPIB(IEEE-488.2) interface
Specifications:
Model HT2620 HT2630 HT2631 HT2632 HT2636 HT2664CH1&CH2 Output Rating:Voltage 0 ~ 20V 0 ~ 32V 0 ~ 32V 0 ~ 32V 0 ~ 36V 0 ~ 64VCurrent 0 ~ 3A 0 ~ 1.2A 0 ~ 2A 0 ~ 3A 0 ~ 1.5A 0 ~ 1AOVP 0.1 ~ 21V 0.1 ~ 34V 0.1 ~ 34V 0.1 ~ 34V 0.1 ~ 38V 0.1 ~ 66VOCP 0.01 ~ 3.2A0.01 ~ 1.4A0.01 ~ 2.2A 0.01 ~ 3.2A0.01 ~ 1.7A0.01 ~ 1.2ACH3 Output Rating:Voltage 0 ~ 6V 0 ~ 32V 0 ~ 6V 0 ~ 6V 0 ~ 6V 0 ~ 6VCurrent 0 ~ 5A 0 ~ 1.2A 0 ~ 5A 0 ~ 3A 0 ~ 3A 0 ~ 3AOVP 0.1 ~ 7V 0.1 ~ 34V 0.1 ~ 7V 0.1 ~ 7V 0.1 ~ 7V 0.1 ~ 7VOCP 0.01 ~ 5.2A0.01 ~ 1.4A 0.01 ~ 5.2A 0.01 ~ 3.2A 0.01 ~ 3.2A 0.01 ~ 3.2ALoad EffectVoltage ≤0.01% + 2mVCurrent ≤0.06% + 2mASource EffectVoltage ≤3mV
Current ≤3mA
Ripple and noise
Voltage ≤1mVrms
Current ≤3mArms (≤5mArms@Load>3A)
Programming accuracy
Voltage ≤0.02% + 5mV
Current ≤0.05% + 8mA
OVP ≤0.05% + 20mV
OCP ≤0.1% + 5mA ( +10mA@Load>3A)
Programming Resolution
Voltage 1mV
Current 100μA
OVP 10mV
OCP 1mAReadback accuracyVoltage ≤0.02% + 5mV
Current ≤0.02% + 5mA