Feature:
Strong and stable framework of cabinet, which has the mounting holes;
the side panel and real panel of the outdoor panel are the double-panel designed, the panels are fixed by the bolt from inner
the side panel covered the enclosures and cases foundation, which avoid entering the enclosure by the compulsory measure
the side panel covered the enclosures and cases foundation, which avoid entering the enclosure by the compulsory measure
Between the inside and outside side panel has the inter space(spacing25mm), which provides the channel to ventilate and support the enclosure internal heat exchange; and also can reduce the influence of the sunlight illumination;
the roof panel of the outdoor cabinet has the awning all around stretches out 25mm and high 75 to keep from the rain,the awning have the integrity well ventilated,which guarantees the air exchange;
Luxury lock with three points bolted on the front door;side panels and rear panels are fixed by screws;
The bottom can be sealed with 3 sectional panels or one sectional panel;
The enclosure is the 19 structre, also can install the mounting panel;
The top loaded with 6 fans to ventilate, two sides have the blind holes to output heat, which attach the dust helmet of cell cotton;
Standard:
NO. | Component Name | Quantity | Unit | Material Specification | Surface Finish | Note |
1 | TOP Cover | 1 | pc | SPCC cold rolled steel T1.2 | Powder Coated | -- |
2 | Bottom Panel | 1 | pc | SPCC cold rolled steel T1.2 | Powder Coated | --- |
3 | Frame | 2 | pc | SPCC cold rolled steel T1.2 | Powder Coated | -- |
4 | Mounting profile | 4 | pc | SPCC cold rolled steel T1.5 | Powder Coated | --- |
5 | Side Poor | 2 | pc | SPCC cold rolled steel T1.2 | Powder Coated | Optional lock--- |
6 | Front Door | 1 | pc | Tempered glass 5mm | Powder Coated | -- |
7 | lock | 1 | pc | Galvanization | Powder Coated | --- |
8 | M6 B-head screw and M6 square nut | 10 | pc | Steel | Color Zinc Coated | -- |
9 | Allen Wrench | 1 | pc | Steel | Black | --- |
10 | Cable entry plate | 2 | pc | SPCC cold rolled steel T1.2 | Powder Coated | --- |
Comply with EN60529/10.91, IEC60529 and GB4208-93 standard,IP55
Material:
IP65
Surface finish:
Degreasing, pickling,phosphoric, powder coated,static powdered;
Mounting Panel:
Color RAL2000SN;
Body of enclosure, frame, side panel and
Doors:
Color RAL7035SN;
