Deep Groove Ball Bearing 6200 Series with high Precision

1. The single row deep groove ball bearings with the shield.
2. Consisit of 2 machined
3. Take the radial load as well asmoderate axial load.
4. They are used in a wide variety of applications.
5. Non-separable, suitable for high and even very high speed and are robust in operation, requiring little maintenance.
6. Other types: Z, ZZ, RS, 2RS
7. Series: 62 series; (other series has 60 series, 63 series)
8. Precision standard: ABEC-1, ABEC-3, ABEC-5
9. Noise standard: Z1, Z2, Z3, Z4

Feature:

1. High load carrying capacity
2. Material incoming: 100%
3. InspectionHardness test: 100% pass
4. Competitive price

Bearing No	Main Dimension(mm)				Load Rating		Weight (kg)
	Bore d(mm)	O. d D(mm)	Width B(mm)	Radius(r)	Dynamic Static
6200	10	30	9	0.6	5.10	2.38	0.032
6201	12	32	10	0.6	6082	3.05	0.037
6202	15	35	11	0.6	7.65	3.72	0.045
6203	17	40	12	0.6	9.58	4.78	0.066
6204	20	47	14	1.0	12.80	6.65	0.106
6205	25	52	15	1.0	14.00	7.88	0.121
62/22	22	50	14	1.0	13.35	7.25	0.128
62/28	28	58	16	1.0	15.52	8.56	0.171
6206	30	62	16	1.0	19.50	11.20	0.199
62/32	32	65	17	1.0	19.60	12.18	0.240
6207	35	72	17	1.1	19.75	13.67	0.287
6208	40	80	18	1.1	22.71	15.94	0.367
6209	45	85	19	1.1	24.36	17.71	0.416
6210	50	90	20	1.1	26.98	19.84	0.462
6211	55	100	21	1.5	33.37	25.11	0.602
6212	62	100	22	1.5	36.74	27.97	0.789
6213	65	120	23	1.5	57.2	40.1	0.99
6214	70	125	24	1.5	62.2	44.1	1.07

MEG Deep Groove Ball Bearing 6200 series

MEG Deep Groove Ball Bearing 6200 series are Single-row deep groove ball bearings, which are the most common type of rolling bearings.

Their use is very widespread. The raceway grooves on both the inner and outer rings have circular arcs of slightly larger radius than that of the balls. In addition to radial loads, axial loads can be imposed in either direction. Because of their low torque, they are highly suitable for applications where high speeds and low power loss are required.

In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery. As to cages, pressed steel ones are most commonly used.

Features:

1): Suitable for very high rotating speeds

2): Well suited for medium high radial and axial loads in one or both directions

3): Various seals and grease variants available for different operating conditions

4): Numerous clearance and tolerance classes available for different operating conditions

5): Series: 6000 series, 6200series, 6300series, etc.

6): Application examples: Electrical motors, general machinery, industrial gearboxes, pumps, agricultural machinery, etc.

Structure: Deep Groove	Type: Ball	Brand:,MEG,NTN,SKF,INK,KOYO,etc.
Model:6200 series	Inside Diameter:10~45mm	Outside Diameter:30~85mm
Breadth:9~19mm	Material: Bearing steel;Gcr15,etc.	Number of Row:Single
Vibration Level:V1~V4	Seal Type:Open, Z, ZZ, RZ,2RZ,RS, 2RS	Precision Rating:P0,P6,P5,P4
Noise Level:Z1~Z4	OEM Services:Offered	Certificate:ISO9001:2000

Brief introduction of deep groove ball bearing:
Deep groove ball bearings are non separable and require little attention or maintenance in service, capable of operating at high speeds and are widely used radial bearings. The inner and outer ring of single row deep groove ball bearings have a deep groove raceway, the bearings are mainly used to carry radial loads and a part of axial loads in two directions. This kind of bearing can carry much heavy axial loads after the increase of radial clearance, thus, it can take the place of high speed angular contact ball bearings.   Deep groove ball bearing have various types in structure, beside open type bearings, shield or seals at both side can also be provided.

Single Row Deep Groove Ball Bearings: Single row deep groove ball bearings are the most commonly used bearing type, which can accommodate radial and thrust loads. These bearings can be used at high speeds. The self-aligning capacity of deep groove ball bearings is limited; therefore the bearing locations must be accurately aligned.

Double Row Deep Groove Ball Bearings Double row deep groove ball bearings have, contrary to their former design, no filling slots. This is the reason that these bearings can accommodate thrust loads in both directions. These are fitted with cages of glass-fibre reinforced polyamide 66 and lubricated with grease. This ball bearing is not suitable, where angular misalignments have to be accommodated.