Introduction:
hammer crusher is applicable for both dry and wet crushing. it is widely used in
hammer crusher is applicable for both dry and wet crushing. it is widely used in
departments of mine, cement, coal, building material, metallurgy, chemical industry, road construction, gas chemical industry and thermal power generation, etc. Coal gangue, coke, slag, limestone, phosphate rock, salt, whiting, gypsum stains, alum, brick and tile, etc. can be crushed by this equipment.
Working principle of our hammer mill (hammer crusher)
The motor drives the rotor of the hammer crusher at high speed through the belt, and on the rotor there are many hammers. when the material get into the working areas, they are crushed by the rotating hammers with high speed, then discharge required products from outlet. The large size products which are blow expectation are brought back to crushing area for crushing again until they reached the required size.
Model | Rotor speed (r/min) | Feed opening size (mm) | Max feeding size (mm) | Discharging size (mm) | Capacity (t/h) | Motor Power (kw) | Weight (t) | Overall dimension L×W×H (mm) |
PC400×400 | 1500 | 145×295 | 100 | 0-30 | 5-8 | 7.5 | 0.9 | 844×942×878 |
PC600×400 | 1000 | 295×450 | 100 | 0-35 | 10-12 | 18.5 | 1.5 | 1000×1100×1300 |
PC600×600 | 1000 | 295×570 | 100 | 0-35 | 12-18 | 45 | 2.14 | 1315×840×1501 |
PC800×600 | 1000 | 350×570 | 120 | 0-45 | 20-25 | 55 | 2.45 | 1515×2586×1040 |
PC800×800 | 1000 | 350×850 | 120 | 0-45 | 35-45 | 55 | 3.05 | 1515×2831×1040 |
PC1000×800 | 1000 | 580×580 | 200 | 0-45 | 25-40 | 110 | 6.5 | 3206×2210×1515 |
PC1000×1000 | 1000 | 580×1060 | 200 | 0-45 | 40-80 | 132 | 7.59 | 3514×2230×1515 |
PC 1250×800 | 750 | 650×850 | 200 | 0-45 | 20-50 | 132 | 11.7 | 2630×1780×2050 |
PC1250×1250 | 750 | 650×1330 | 200 | 0-45 | 90-110 | 185 | 13.2 | 2630×2180×2050 |
PC1400×1400 | 750 | 1050×1540 | 250 | 0-45 | 120-170 | 280 | 17.2 | 2790×2800×2310 |
PC1600×1600 | 600 | 1500×1785 | 350 | 0-60 | 220-280 | 450 | 22.8 | 3350×3120×2660 |
.jpg)
.jpg)
