(1) Operating voltage: 12V DC
(2) Specifications: 5000 * 8mm, 3528lamp beads, one meter 30 lights, 5M /Roll, 2.4 W/Meter, Color:Red/Yellow/Blue/Green/White/Warm White.
(3) Waterproof grade: IP65
(4) LED emitting angle: greater than 140 degrees
(5) Working temperature: -50-70 degree
(6) Power supply: high-quality constant voltage power supply
(7) Use FPC
(2) Specifications: 5000 * 8mm, 3528lamp beads, one meter 30 lights, 5M /Roll, 2.4 W/Meter, Color:Red/Yellow/Blue/Green/White/Warm White.
(3) Waterproof grade: IP65
(4) LED emitting angle: greater than 140 degrees
(5) Working temperature: -50-70 degree
(6) Power supply: high-quality constant voltage power supply
(7) Use FPC
(8) Warranty: 24 months
Product description:
SMD lamps with the production of the company are highlighted 3528SMD flexible printed circuit board, with energy saving, high brightness, low attenuation, easy shear install and features, the life expectancy of up to 80,000 hours.
This product as a backlight is widely used in interior cove, window dressing, thin light boxes, light word, hotels, shopping malls and other high places.
Product Features:
This product as a backlight is widely used in interior cove, window dressing, thin light boxes, light word, hotels, shopping malls and other high places.
Product Features:
1 Out of every three LEDs to form a loop can be arbitrarily cut off along the tangent above, without damaging other parts.
2, Made by the FPC board, can easily bend, can be arbitrarily fixed in the contour surface.
3, The size and number of LED according to the requirements of production, small size, a variety of colors for customers to choose.
4, Using LED as a regular chip production, high brightness, low light fades, the color of one to long life, according to the guests design lights away.
5, For the path and outline signs, illuminated signs, transparent and non-transparent material around the light:
2, Made by the FPC board, can easily bend, can be arbitrarily fixed in the contour surface.
3, The size and number of LED according to the requirements of production, small size, a variety of colors for customers to choose.
4, Using LED as a regular chip production, high brightness, low light fades, the color of one to long life, according to the guests design lights away.
5, For the path and outline signs, illuminated signs, transparent and non-transparent material around the light:
Installation Instructions:
(1) This product on the back affixed with double-sided 3M strong adhesive tape, simply tear off the protective film installation directly affixed to the desired location.
(2) The maximum number of connections this section light single driver for 2 exceed the number of, and to raise the power drive circuit.
(3) Calculate the electrical power, design and distribution scheme: a single light bar of the budget number of LED lights X power = power consumption of the total power (recommended power matching to left margin, 80 percent use the rated power)
(2) The maximum number of connections this section light single driver for 2 exceed the number of, and to raise the power drive circuit.
(3) Calculate the electrical power, design and distribution scheme: a single light bar of the budget number of LED lights X power = power consumption of the total power (recommended power matching to left margin, 80 percent use the rated power)
Installation:
(1) Note that the output DC voltage of the switching power supply with the rated voltage of the lights, do not directly use the AC 220V point lighting strips.
(2) To ensure that the light bar install solid and reliable, it is best to use special 3M glue fixed.
Please scissors marked by shearing, such as outdoor installation, you must deal with the middle of wiring at waterproofing measures.
(4) Do not excessively bend pull light, the minimum angle of not less than 10 degrees.
(5) This product 24V six lights and a cut, 12V, three lights and a cut.
(6) To be installed in anti-static environment, the proposed operator to wear a static ring.
(1) Note that the output DC voltage of the switching power supply with the rated voltage of the lights, do not directly use the AC 220V point lighting strips.
(2) To ensure that the light bar install solid and reliable, it is best to use special 3M glue fixed.
Please scissors marked by shearing, such as outdoor installation, you must deal with the middle of wiring at waterproofing measures.
(4) Do not excessively bend pull light, the minimum angle of not less than 10 degrees.
(5) This product 24V six lights and a cut, 12V, three lights and a cut.
(6) To be installed in anti-static environment, the proposed operator to wear a static ring.
