Dear friends ,
welcome to our company site !
jindong machine
JD series automatic bottle blowing machines characteristics
1. Adopts advanced microcomputer control system, stable performance
2. Conveyor automatically send embryos
3. Adjust infrared heating lamps based on touch the temperature, the operation is simple, convenient, strong penetrating power, bottles of embryo heated, heating uniform, rotating rapid and stable.
4. Into bottles of scrap rate below 0.2%
JD-06XX Main technical parameters
Composition | Project | Technical parameters |
Products conditions | Products maximum volume(ml) | 600mL |
Products maximum diameter (MM) | Φ70 | |
Products size bottle (MM) | Φ12 ~ Φ38 | |
Products maximum height(MM) | <240 | |
Suitable for embryo tube maximum height (MM) | <115 | |
Shut the mould trip | 82 mm | |
Bottom-formwork trip | 50mm | |
Bottle spacing (MM) | 76.2 | |
Mouldstandardthickness (MM) | 168 | |
Production capacity (bottles/hour) | 5,600~6,000 | |
Mold cavity number | 6 | |
Heating part | Heating unit | 4 |
Heating lamp layer | 6 | |
Germ tubes seat number (a) | 114 | |
Electrical parameters | Voltage | 220/380V |
Frequency | 50/60Hz | |
Use power | 24~28.8kw/h | |
Installed power | 50.5kw | |
Air (High-pressure gas consumption PET bottle volume on and calm) | Low voltage compressed air pressure | 8~10bar |
Low voltage compressed air gas consumption | 2.0~2.5m3/min | |
High-pressure compressde air pressuue | 26~35bar | |
High-pressure compressed air gas consumption | 3.6~4.2m3/min | |
Cooling water | Pressure | 3~4bar |
Cooling water (temperature≤18°C) | Temperature | 5m3/h |
Weight | Host\Heating machine\Body,etc | 5.5t |
Equipment configuration dimensions | Sixe (L×W×H) | 4850mm×2150mm×2100mm |
Richard embryo machine (L×W×H) | 2550mm×2120mm×2900mm |
