Hydraulic Pressure Tools

Stainless Steel hydraulic bladder Accumulator
1.structure type: type A type AB
2.working pressure 10Mpa 25Mpa 35Mpa
3. nominal volume:0.4L~250

Electro-hydraulic servo valve
Characteristics:
1)Stable function and High frequency response
2)Different flow ,different working pressure base

Application:
hole punching and metal forming machine
Punching pressure:
35T
Ram stroke:...

1.cir110mm -150mm dth button bits for cir 110 series DTH hammer
2.dth drilling tools
3.cir110mm-150mm dth button bits

40KN Max tension hydraulic pressure cable tensioner for overhead power line construction and underground power transmission construction.

Carbon steel
Cr6+ free zinc plating
Salt spray test:>=120 hours
Medium: Gas, Water, Oil
Parker, Eaton, Manuli, Alfagomma products are exchangeable

Material: Stainless steel, carbon steel, brass, aluminum, brass, copper, etc
Surface/Finish: Zinc Blue, Zinc Yellow, Zinc Clear, Nickel Flash, etc

.Low cost, reliable.
2.No load reaction on the steering wheel comfortable.
3.Manual operation available when the pump doesnt work.

Cable pulling winch is used for pulling underground cable in the trench or on the ground, it is electric and used with catepillar pusher.

1) standard tie-rod apperence
2) hydraulic oil drive
3) many installation types
4) stroke to max1000mm
5) non-standard can customized

high quality Bladder Accumulator for hydraulic lift
1Model Number:NXQA or NXQAB
2.working pressure :10Mpa 25Mpa 35Mpa
3.Operating Temperature:80ºC

Model Number:
Q35Y cnc ironworker
Voltage:
220V/380V
Rated Power:...

9 Ton Max linepull hydraulic pressure cable puller for overhead power line construction. Adopt Chinese water cooled engine.

Material: Carbon Steel, Stainless steel, Brass ect
Surface treatment: Plated with zinc
Usage: Water Pipe, Oil Pump, Automatic Door Components etc

1.DTH bit
2.6 Inch 165mm Dth Hammer Bit/button Drill Bit
3.Cir110 Dth Hammer And Button Bits

1. Shaft groove distributes flow, simple and compact structure, high accuracy of flow distributing
2. Stator-rotor in toothed shape, high mechanical

This QY-300 hydraulic crimping tool serves to crimp the conductor, earth wire, and the terminals connecting copper wires with aluminum wires.

hydraulic accumulator for high pressure bladder water pump
1.Type:Bladder accumulator
2.Size:0.4-250L
3.Pressure:10,20,31.5Mpa;100,200,330Bar

1) standard tie-rod apperence
2) hydraulic oil drive
3) many installation types
4) max 1000mm stroke
5) non-standard can customized

Model Number:
Q35Y cnc ironworker
Voltage:
220V/380V
Rated Power:...