Surface Roughness Tester
Type: Buying Lead
Date Posted: 2015-08-28
Valid to: Never Expired
Country: China (Mainland)
Description: Model:SRT-6200
This instrument is compatible with four standards of site to measure surface roughness of various machinery-processed parts, calculate corresponding and clearly display all measurement parameters. When measuring the roughness of a surface, the sensor is placed on the surface and then uniformly slides along the surface by driving the mechanism by the sharp built-in probe. This roughness causes displacement of the probe which results in change of inductive amount of induction coils so as to generate analogue signal, which is in proportion to the surface roughness at output end of phase-sensitive rectifier. The exclusive DSP processes and calculates and then outputs the measurement results on LCD.
* Multiple parameter measurement: Ra, Rz, Rq, Rt
* Highly sophisticated inductance sensor
* Four wave filtering methods : RC, PC-RC, GAUSS and D-P
* Built-in lithium ion rechargeable battery and control circuit with high capacity
* Small in size, light in weight and easy to use
* Can communicate with PC computer for statistics, printing and analyzing by the optional cable and the software for RS232C interface.
*Manual or automatic shut down. The tester can be switched off  by pressing  the Power key at any time. On the other hand, the tester will power itself off about 5 minutes after the last  key operation.
*The tester can memorize 7 groups of measurement results and measuring conditions for later use or download to PC.
*Metric /Imperial Conversion
Display: 4 digits, 10 mm LCD, with blue backlight
Parameters:  Ra, Rz
Display  Range
           Ra:   0.05-10.00um/1.000-400.0uinch
           Rz:   0.020-100.0um/0.780-4000uinch
Accuracy: Not more than 10%
Fluctuation of display value: Not more than 6%
Sensor :
         Test Principle: Inductance type
         Radius of Probe Pin: 10um
         Material of Probe Pin: Diamond
         Measurement Force of Probe: 16mN(1.6gf)
         Probe Angle: 90°
         Vertical Radius of Guiding Head: 48mm
Maximum driving stroke:  17.5mm/0.7inch
Cutoff length (l): 0.25mm / 0.8mm / 2.5mm  optional
Evaluation length:  1~5 cut off  optional
Driving speed:
         sampling length = 0.25mm   Vt=0.135mm/s
         sampling length = 0.8mm    Vt=0.5mm/s
         sampling length = 2.5mm    Vt=1mm/s
         returning                                Vt=1mm/s
Resolution : 0.001μm    if reading <10μm
                      0.01μm    if 10μm≤reading<100μm
                      0.1μm    if reading ≥100μm                              
Power Li-ion battery: rechargeable
Operating conditions:  Temp. 0~50℃
                                      Humidity <80%
Size:140x57x48 mm  (5.5x2.2x1.9 inch)    
Weight: about 420 g
Contact Details

Ms. Ego Wong
Guangzhou Landtek Instruments Co.,Ltd
Tel: 86-20-81609116
Address: China (Mainland)
Send a message to him/her

Enter between 20 to 3,000 chatacters,English only.
Related Trades
  • Application: shore C is designed for various foam and sponge.
    Model: HT6510C 
    Product info: digital durometer for shore hardness testing...
    China (Mainland)
  • used for measuring thickness and corrosion of pressure vessels,chemical equipment,boilers,oil storage tanks,etc.
    China (Mainland)
  • used in data collection for boiler, refrigeration industry, ventilation duct, environment monitor, navigation measurement, weather forecast
    China (Mainland)
  • Shore A ans Shore D
    China (Mainland)
  • to measure surface roughness of various machinery-processed parts, calculate corresponding and clearly display all measurement parameters.
    China (Mainland)
  • Application: used for measuring periodic motion, to check the imbalance and deflecting of moving machinery.
    China (Mainland)
Didn't find what you're looking for? Post Buying Lead or contact our customer service specialist for help!
Buyer Help Center