Descriptions:
It is specifically designed to meet the rapid growth of FTTX market with PON (Passive Optical Network) technologies. It is capable to measure all three signals (1310nm, 1490nm and 1550nm) that carry voice, data and video, so-called triple-play applications along a single fiber. FHP3P01 can measure not only 1490nm and 1550nm optical signal, but also accurately detect and measure the upstream burst at 1310nm sent from an ONU while the ONU is in the idle mode. The simple operation and accurate measurement make FHP3P01 becomes an ideal tool for PON (suitable for APON, BPON, EPON and GPON application) installation/acceptance test to ensure that they meet required standards, and service activation and troubleshooting.
Features
Cost efficient palm size designed for field and lab testing
Support P/F measurement and normal measurement
Easy-to-use interface with large color TFT display for easy visibility and LED indicators.
Simply connect-and-display the results of all three wavelengths (1310/1490/1550nm) of PON signals with two optical ports
Detect and measure the upstream burst at 1310nm
Support APON, BPON, EPON and GPON networks
Pass, Fail and Warning indicators for easy view of signal condition
User definable threshold value (up to 10 sets)
Auto power shut off
Low battery warning
USB interface
Real-time clock.
Unit runs either by Ni-MH battery for more than 20 hours continuously work or AC/DC adapter.
It is specifically designed to meet the rapid growth of FTTX market with PON (Passive Optical Network) technologies. It is capable to measure all three signals (1310nm, 1490nm and 1550nm) that carry voice, data and video, so-called triple-play applications along a single fiber. FHP3P01 can measure not only 1490nm and 1550nm optical signal, but also accurately detect and measure the upstream burst at 1310nm sent from an ONU while the ONU is in the idle mode. The simple operation and accurate measurement make FHP3P01 becomes an ideal tool for PON (suitable for APON, BPON, EPON and GPON application) installation/acceptance test to ensure that they meet required standards, and service activation and troubleshooting.
Features
Cost efficient palm size designed for field and lab testing
Support P/F measurement and normal measurement
Easy-to-use interface with large color TFT display for easy visibility and LED indicators.
Simply connect-and-display the results of all three wavelengths (1310/1490/1550nm) of PON signals with two optical ports
Detect and measure the upstream burst at 1310nm
Support APON, BPON, EPON and GPON networks
Pass, Fail and Warning indicators for easy view of signal condition
User definable threshold value (up to 10 sets)
Auto power shut off
Low battery warning
USB interface
Real-time clock.
Unit runs either by Ni-MH battery for more than 20 hours continuously work or AC/DC adapter.
| Model | FHP3P01 | ||
| Calibrated Wavelength | 1310nm | 1490nm | 1550nm |
| Measuring Range( continuous datastream) (dBm) | -40 to +10 | -50 to +15 | -50 to +20 |
| Burst signal measuring range( 1310nm ) (dBm) | -32 to +10 | ||
| Spectral Pass-band (nm) | 1260 ~ 1360 | 1480 ~ 1500 | 1539 ~ 1565 |
| Connector Type | Interchangeable FC, SC and ST | ||
| Detector Type | InGaAs | ||
| Insertion loss | 1.5dB | ||
| Accuracy | ± 0.5dB | ||
| Linearity | ± 0.2dB | ||
| Interfaces | 2 ports: one for 1310nm (ONU) and one for 1490nm/1550nm (OLT) | ||
| Communication port | USB | ||
| Data Storage | 1000 sets | ||
| Auto Power Off | Yes | ||
| Back-light | Yes | ||
| Refresh Rate of Display | 2.5Hz | ||
| Threshold Value | 10 sets (configured via PC-based software) | ||
| Operating Temperature | -10 ~ +50° C |
| Storage Temperature | -20 ~ +70° C |
| Relative Humidity | 0% ~ 95% (non-condensing) |
| Power Supply | 4 pcs 1.2V Ni-MH AA, 6V AC/DC Adaptor |
| Batter life | > 20 hours on typical measurement |
| Dimension (mm) with rubber boot on | 190L x 105W x 55H |
| Display | 2.8 inch TFT Color LCD |
| Net Weight | 700g |
.jpg)
.jpg)
.jpg)
.gif)
