- Power entry module with switchor fuse
- For 10A capability and highperformance filtering see the P Series
- Two element circuit providesextended EMI attenuation similar to EAB inlet filter
- North American or metric fuseholders
- Available with minimal leakagecurrent for
medical applications (HL models)
Ordering Information
Available Part Numbers
Available Part Numbers | North American Fusing | Metric Fusing | |||
Flange Mount | Snap-In | Flange Mount | Snap-In | ||
Non-Filtered | Single Voltage, Switched | 6EL1S | 6EL1SC | 6EL1SM | 6EL1SCM |
4 Voltage Select, No Switch | 6EL4 | 6EL4C | 6EL4M | 6EL4CM | |
General PurposeFilter | Single Voltage, Switched | 2EDL1S | 2EDL1SC | 2EDL1SM | 2EDL1SCM |
4EDL1S | 4EDL1SC | 4EDL1SM | 4EDL1SCM | ||
6EDL1S | 6EDL1SC | 6EDL1SM | 6EDL1SCM | ||
4 Voltage Select, No Switch | 2EDL4 | 2EDL4C | 2EDL4M | 2EDL4CM | |
4EDL4 | 4EDL4C | 4EDL4M | 4EDL4CM | ||
6EDL4 | 6EDL4C | 6EDL4M | 6EDL4CM | ||
Medical Filter | Single Voltage, Switched | 6EHL1S | 6EHL1SC | 6EHL1SM | 6EHL1SCM |
4 Voltage Select, No Switch | 6EHL4 | 6EHL4C | 6EHL4M | 6EHL4CM |
Specifications
Maximum leakagecurrent, each Line to Ground † : | |||
DL Models | HL Models | ||
@ 120 VAC 60 Hz: | 0.25 mA | 2 µA | |
@ 250 VAC 50 Hz | 0.50 mA | 5 µA | |
Hipot rating (one minute): | |||
Line to Ground | 2250 VDC | ||
Line to Line | 1450 VDC | ||
Operating Frequency: | 50 / 60 Hz | ||
Operating voltages: | |||
1S & 1SC Suffix (fixed) | 250 VAC Max. | ||
4 & 4C Suffix (selectable) | 100, 120, 220, 240VAC | ||
Rated Current: | |||
2EDL & 2EHL | 2A | ||
Required Fuse(s): | |||
North American: | one .25 x 1.25"(notincluded) | ||
Metric: | two 5 x 20mm (notincluded) | ||
Switch: | DPST 10,000 operations at 51A max. inrush |
Voltage Selection
To change selected voltage: disconnect the power cord; open cover using a small blade screwdriver or similar tool; insert the tool into the voltage selection slot and remove wheel from unit; select desired voltage; replace wheel into unit and close cover, making sure the selected voltage appears in connector window.
Accessories
GA400: NEMA 5-15P to IEC 60320-1 C13 line cord
LA303: Voltage Select Wheel, 3 position
Selection drum for use with L4 models.
Marked with 110V, 220V and 240V
Marked with 110V, 220V and 240V
LA304: Voltage Select Wheel, 4 position
Selection drum for use with L4 models.
Marked with 100V, 110V, 220V and 240V.
One LA304 comes standard with each L4 model.
Marked with 100V, 110V, 220V and 240V.
One LA304 comes standard with each L4 model.
LA400: Blank insert
Blank to replace switch in single voltage models
Blank to replace switch in single voltage models
LA601: Insulating Boot
Plastic shroud to cover back of module to prevent inadvertent access
Plastic shroud to cover back of module to prevent inadvertent access
Replacement Fuse Holders
LA200: North American Fuseholder
Accommodates one .25 x 1.25" fuse
Accommodates one .25 x 1.25" fuse
LA201: Metric Fuseholder
Accommodates one 5 x 20mm metric fuse
Accommodates one 5 x 20mm metric fuse
Electrical Schematics
DL Models
Single Voltage, Switched (DL1S)
4 Voltage Select, No-Switch (DL4)
4 Voltage Select, No-Switch (HL4)
Recommended Panel Cutouts
Recommended Panel Cutouts
Notes:
(1) For panel thickness of .031 – .079 [0.8 – 2.0]
(2) For panel thickness of .083 – .126 [2.1 – 3.2]
(3) Mounting Holes .126 [3.20] Dia. for flange mounted versions only
(4) For Snap-In applications, the 1.12 [28.5] sides of the cutout must have a .02 [.508] radius on the installation side. Not required for flange mount versions.
Case Dimensions
(2) For panel thickness of .083 – .126 [2.1 – 3.2]
(3) Mounting Holes .126 [3.20] Dia. for flange mounted versions only
(4) For Snap-In applications, the 1.12 [28.5] sides of the cutout must have a .02 [.508] radius on the installation side. Not required for flange mount versions.
Case Dimensions
Part No. | A | B | C | D | E | F |
(max.) | ± .015 | (max.) | (max.) | (max.) | (max.) | |
± .381 | ||||||
Flange Unfiltered | 1.98 | 1.575 | 2.3 | 2.14 | 1.66 | 1.11 |
50.29 | 40.0 | 58.42 | 54.36 | 42.16 | 28.19 | |
Snap-in Unfiltered | 1.28 | 2.3 | 2.14 | 1.66 | 1.11 | |
32.51 | 58.42 | 54.36 | 42.16 | 28.19 | ||
Flange Filtered | 1.98 | 1.575 | 2.3 | 2.14 | 2.01 | 1.11 |
50.29 | 40.0 | 58.42 | 54.36 | 51.05 | 28.19 | |
Snap-in Filtered | 1.28 | 2.3 | 2.14 | 2.01 | 1.11 | |
32.51 | 58.42 | 54.36 | 51.05 | 28.19 | ||